Add mbedTLS lib. Version 2.7.0, license Apache 2.0

thirdparty/README.md

@@ -234,6 +234,16 @@ File extracted from upstream source:
 Important: `lws_config.h` and `lws_config_private.h` contains custom 
 Godot build configurations, check them out when updating.
 
+## mbedTLS
+
+- Upstream: https://tls.mbed.org/
+- Version: 2.7.0
+- License: Apache 2.0
+
+File extracted from upstream release tarball `mbedtls-2.7.0-apache.tgz`:
+- All `*.h` from `include/mbedtls/` to `thirdparty/include/mbedtls/`
+- All `*.c` from `library/` to `thirdparty/library/`
+
 ## minizip
 
 - Upstream: http://www.zlib.net

thirdparty/mbedtls/include/mbedtls/aesni.h

+/**
+ * \file aesni.h
+ *
+ * \brief AES-NI for hardware AES acceleration on some Intel processors
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_AESNI_H
+#define MBEDTLS_AESNI_H
+
+#include "aes.h"
+
+#define MBEDTLS_AESNI_AES      0x02000000u
+#define MBEDTLS_AESNI_CLMUL    0x00000002u
+
+#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) &&  \
+    ( defined(__amd64__) || defined(__x86_64__) )   &&  \
+    ! defined(MBEDTLS_HAVE_X86_64)
+#define MBEDTLS_HAVE_X86_64
+#endif
+
+#if defined(MBEDTLS_HAVE_X86_64)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          AES-NI features detection routine
+ *
+ * \param what     The feature to detect
+ *                 (MBEDTLS_AESNI_AES or MBEDTLS_AESNI_CLMUL)
+ *
+ * \return         1 if CPU has support for the feature, 0 otherwise
+ */
+int mbedtls_aesni_has_support( unsigned int what );
+
+/**
+ * \brief          AES-NI AES-ECB block en(de)cryption
+ *
+ * \param ctx      AES context
+ * \param mode     MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
+ * \param input    16-byte input block
+ * \param output   16-byte output block
+ *
+ * \return         0 on success (cannot fail)
+ */
+int mbedtls_aesni_crypt_ecb( mbedtls_aes_context *ctx,
+                     int mode,
+                     const unsigned char input[16],
+                     unsigned char output[16] );
+
+/**
+ * \brief          GCM multiplication: c = a * b in GF(2^128)
+ *
+ * \param c        Result
+ * \param a        First operand
+ * \param b        Second operand
+ *
+ * \note           Both operands and result are bit strings interpreted as
+ *                 elements of GF(2^128) as per the GCM spec.
+ */
+void mbedtls_aesni_gcm_mult( unsigned char c[16],
+                     const unsigned char a[16],
+                     const unsigned char b[16] );
+
+/**
+ * \brief           Compute decryption round keys from encryption round keys
+ *
+ * \param invkey    Round keys for the equivalent inverse cipher
+ * \param fwdkey    Original round keys (for encryption)
+ * \param nr        Number of rounds (that is, number of round keys minus one)
+ */
+void mbedtls_aesni_inverse_key( unsigned char *invkey,
+                        const unsigned char *fwdkey, int nr );
+
+/**
+ * \brief           Perform key expansion (for encryption)
+ *
+ * \param rk        Destination buffer where the round keys are written
+ * \param key       Encryption key
+ * \param bits      Key size in bits (must be 128, 192 or 256)
+ *
+ * \return          0 if successful, or MBEDTLS_ERR_AES_INVALID_KEY_LENGTH
+ */
+int mbedtls_aesni_setkey_enc( unsigned char *rk,
+                      const unsigned char *key,
+                      size_t bits );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_HAVE_X86_64 */
+
+#endif /* MBEDTLS_AESNI_H */

thirdparty/mbedtls/include/mbedtls/arc4.h

+/**
+ * \file arc4.h
+ *
+ * \brief The ARCFOUR stream cipher
+ *
+ * \warning   ARC4 is considered a weak cipher and its use constitutes a
+ *            security risk. We recommend considering stronger ciphers instead.
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ *
+ */
+#ifndef MBEDTLS_ARC4_H
+#define MBEDTLS_ARC4_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+
+#define MBEDTLS_ERR_ARC4_HW_ACCEL_FAILED                  -0x0019  /**< ARC4 hardware accelerator failed. */
+
+#if !defined(MBEDTLS_ARC4_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief     ARC4 context structure
+ *
+ * \warning   ARC4 is considered a weak cipher and its use constitutes a
+ *            security risk. We recommend considering stronger ciphers instead.
+ *
+ */
+typedef struct
+{
+    int x;                      /*!< permutation index */
+    int y;                      /*!< permutation index */
+    unsigned char m[256];       /*!< permutation table */
+}
+mbedtls_arc4_context;
+
+/**
+ * \brief          Initialize ARC4 context
+ *
+ * \param ctx      ARC4 context to be initialized
+ *
+ * \warning        ARC4 is considered a weak cipher and its use constitutes a
+ *                 security risk. We recommend considering stronger ciphers
+ *                 instead.
+ *
+ */
+void mbedtls_arc4_init( mbedtls_arc4_context *ctx );
+
+/**
+ * \brief          Clear ARC4 context
+ *
+ * \param ctx      ARC4 context to be cleared
+ *
+ * \warning        ARC4 is considered a weak cipher and its use constitutes a
+ *                 security risk. We recommend considering stronger ciphers
+ *                 instead.
+ *
+ */
+void mbedtls_arc4_free( mbedtls_arc4_context *ctx );
+
+/**
+ * \brief          ARC4 key schedule
+ *
+ * \param ctx      ARC4 context to be setup
+ * \param key      the secret key
+ * \param keylen   length of the key, in bytes
+ *
+ * \warning        ARC4 is considered a weak cipher and its use constitutes a
+ *                 security risk. We recommend considering stronger ciphers
+ *                 instead.
+ *
+ */
+void mbedtls_arc4_setup( mbedtls_arc4_context *ctx, const unsigned char *key,
+                 unsigned int keylen );
+
+/**
+ * \brief          ARC4 cipher function
+ *
+ * \param ctx      ARC4 context
+ * \param length   length of the input data
+ * \param input    buffer holding the input data
+ * \param output   buffer for the output data
+ *
+ * \return         0 if successful
+ *
+ * \warning        ARC4 is considered a weak cipher and its use constitutes a
+ *                 security risk. We recommend considering stronger ciphers
+ *                 instead.
+ *
+ */
+int mbedtls_arc4_crypt( mbedtls_arc4_context *ctx, size_t length, const unsigned char *input,
+                unsigned char *output );
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_ARC4_ALT */
+#include "arc4_alt.h"
+#endif /* MBEDTLS_ARC4_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ *
+ * \warning        ARC4 is considered a weak cipher and its use constitutes a
+ *                 security risk. We recommend considering stronger ciphers
+ *                 instead.
+ *
+ */
+int mbedtls_arc4_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* arc4.h */

thirdparty/mbedtls/include/mbedtls/asn1write.h

+/**
+ * \file asn1write.h
+ *
+ * \brief ASN.1 buffer writing functionality
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ASN1_WRITE_H
+#define MBEDTLS_ASN1_WRITE_H
+
+#include "asn1.h"
+
+#define MBEDTLS_ASN1_CHK_ADD(g, f) do { if( ( ret = f ) < 0 ) return( ret ); else   \
+                                g += ret; } while( 0 )
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief           Write a length field in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param len       the length to write
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_len( unsigned char **p, unsigned char *start, size_t len );
+
+/**
+ * \brief           Write a ASN.1 tag in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param tag       the tag to write
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_tag( unsigned char **p, unsigned char *start,
+                    unsigned char tag );
+
+/**
+ * \brief           Write raw buffer data
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param buf       data buffer to write
+ * \param size      length of the data buffer
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_raw_buffer( unsigned char **p, unsigned char *start,
+                           const unsigned char *buf, size_t size );
+
+#if defined(MBEDTLS_BIGNUM_C)
+/**
+ * \brief           Write a big number (MBEDTLS_ASN1_INTEGER) in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param X         the MPI to write
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_mpi( unsigned char **p, unsigned char *start, const mbedtls_mpi *X );
+#endif /* MBEDTLS_BIGNUM_C */
+
+/**
+ * \brief           Write a NULL tag (MBEDTLS_ASN1_NULL) with zero data in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_null( unsigned char **p, unsigned char *start );
+
+/**
+ * \brief           Write an OID tag (MBEDTLS_ASN1_OID) and data in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param oid       the OID to write
+ * \param oid_len   length of the OID
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_oid( unsigned char **p, unsigned char *start,
+                    const char *oid, size_t oid_len );
+
+/**
+ * \brief           Write an AlgorithmIdentifier sequence in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param oid       the OID of the algorithm
+ * \param oid_len   length of the OID
+ * \param par_len   length of parameters, which must be already written.
+ *                  If 0, NULL parameters are added
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_algorithm_identifier( unsigned char **p, unsigned char *start,
+                                     const char *oid, size_t oid_len,
+                                     size_t par_len );
+
+/**
+ * \brief           Write a boolean tag (MBEDTLS_ASN1_BOOLEAN) and value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param boolean   0 or 1
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_bool( unsigned char **p, unsigned char *start, int boolean );
+
+/**
+ * \brief           Write an int tag (MBEDTLS_ASN1_INTEGER) and value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param val       the integer value
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_int( unsigned char **p, unsigned char *start, int val );
+
+/**
+ * \brief           Write a printable string tag (MBEDTLS_ASN1_PRINTABLE_STRING) and
+ *                  value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param text      the text to write
+ * \param text_len  length of the text
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_printable_string( unsigned char **p, unsigned char *start,
+                                 const char *text, size_t text_len );
+
+/**
+ * \brief           Write an IA5 string tag (MBEDTLS_ASN1_IA5_STRING) and
+ *                  value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param text      the text to write
+ * \param text_len  length of the text
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_ia5_string( unsigned char **p, unsigned char *start,
+                           const char *text, size_t text_len );
+
+/**
+ * \brief           Write a bitstring tag (MBEDTLS_ASN1_BIT_STRING) and
+ *                  value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param buf       the bitstring
+ * \param bits      the total number of bits in the bitstring
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_bitstring( unsigned char **p, unsigned char *start,
+                          const unsigned char *buf, size_t bits );
+
+/**
+ * \brief           Write an octet string tag (MBEDTLS_ASN1_OCTET_STRING) and
+ *                  value in ASN.1 format
+ *                  Note: function works backwards in data buffer
+ *
+ * \param p         reference to current position pointer
+ * \param start     start of the buffer (for bounds-checking)
+ * \param buf       data buffer to write
+ * \param size      length of the data buffer
+ *
+ * \return          the length written or a negative error code
+ */
+int mbedtls_asn1_write_octet_string( unsigned char **p, unsigned char *start,
+                             const unsigned char *buf, size_t size );
+
+/**
+ * \brief           Create or find a specific named_data entry for writing in a
+ *                  sequence or list based on the OID. If not already in there,
+ *                  a new entry is added to the head of the list.
+ *                  Warning: Destructive behaviour for the val data!
+ *
+ * \param list      Pointer to the location of the head of the list to seek
+ *                  through (will be updated in case of a new entry)
+ * \param oid       The OID to look for
+ * \param oid_len   Size of the OID
+ * \param val       Data to store (can be NULL if you want to fill it by hand)
+ * \param val_len   Minimum length of the data buffer needed
+ *
+ * \return      NULL if if there was a memory allocation error, or a pointer
+ *              to the new / existing entry.
+ */
+mbedtls_asn1_named_data *mbedtls_asn1_store_named_data( mbedtls_asn1_named_data **list,
+                                        const char *oid, size_t oid_len,
+                                        const unsigned char *val,
+                                        size_t val_len );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_ASN1_WRITE_H */

thirdparty/mbedtls/include/mbedtls/base64.h

+/**
+ * \file base64.h
+ *
+ * \brief RFC 1521 base64 encoding/decoding
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_BASE64_H
+#define MBEDTLS_BASE64_H
+
+#include <stddef.h>
+
+#define MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL               -0x002A  /**< Output buffer too small. */
+#define MBEDTLS_ERR_BASE64_INVALID_CHARACTER              -0x002C  /**< Invalid character in input. */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Encode a buffer into base64 format
+ *
+ * \param dst      destination buffer
+ * \param dlen     size of the destination buffer
+ * \param olen     number of bytes written
+ * \param src      source buffer
+ * \param slen     amount of data to be encoded
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL.
+ *                 *olen is always updated to reflect the amount
+ *                 of data that has (or would have) been written.
+ *                 If that length cannot be represented, then no data is
+ *                 written to the buffer and *olen is set to the maximum
+ *                 length representable as a size_t.
+ *
+ * \note           Call this function with dlen = 0 to obtain the
+ *                 required buffer size in *olen
+ */
+int mbedtls_base64_encode( unsigned char *dst, size_t dlen, size_t *olen,
+                   const unsigned char *src, size_t slen );
+
+/**
+ * \brief          Decode a base64-formatted buffer
+ *
+ * \param dst      destination buffer (can be NULL for checking size)
+ * \param dlen     size of the destination buffer
+ * \param olen     number of bytes written
+ * \param src      source buffer
+ * \param slen     amount of data to be decoded
+ *
+ * \return         0 if successful, MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL, or
+ *                 MBEDTLS_ERR_BASE64_INVALID_CHARACTER if the input data is
+ *                 not correct. *olen is always updated to reflect the amount
+ *                 of data that has (or would have) been written.
+ *
+ * \note           Call this function with *dst = NULL or dlen = 0 to obtain
+ *                 the required buffer size in *olen
+ */
+int mbedtls_base64_decode( unsigned char *dst, size_t dlen, size_t *olen,
+                   const unsigned char *src, size_t slen );
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ */
+int mbedtls_base64_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* base64.h */

thirdparty/mbedtls/include/mbedtls/blowfish.h

+/**
+ * \file blowfish.h
+ *
+ * \brief Blowfish block cipher
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_BLOWFISH_H
+#define MBEDTLS_BLOWFISH_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define MBEDTLS_BLOWFISH_ENCRYPT     1
+#define MBEDTLS_BLOWFISH_DECRYPT     0
+#define MBEDTLS_BLOWFISH_MAX_KEY_BITS     448
+#define MBEDTLS_BLOWFISH_MIN_KEY_BITS     32
+#define MBEDTLS_BLOWFISH_ROUNDS      16         /**< Rounds to use. When increasing this value, make sure to extend the initialisation vectors */
+#define MBEDTLS_BLOWFISH_BLOCKSIZE   8          /* Blowfish uses 64 bit blocks */
+
+#define MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH                -0x0016  /**< Invalid key length. */
+#define MBEDTLS_ERR_BLOWFISH_HW_ACCEL_FAILED                   -0x0017  /**< Blowfish hardware accelerator failed. */
+#define MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH              -0x0018  /**< Invalid data input length. */
+
+#if !defined(MBEDTLS_BLOWFISH_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Blowfish context structure
+ */
+typedef struct
+{
+    uint32_t P[MBEDTLS_BLOWFISH_ROUNDS + 2];    /*!<  Blowfish round keys    */
+    uint32_t S[4][256];                 /*!<  key dependent S-boxes  */
+}
+mbedtls_blowfish_context;
+
+/**
+ * \brief          Initialize Blowfish context
+ *
+ * \param ctx      Blowfish context to be initialized
+ */
+void mbedtls_blowfish_init( mbedtls_blowfish_context *ctx );
+
+/**
+ * \brief          Clear Blowfish context
+ *
+ * \param ctx      Blowfish context to be cleared
+ */
+void mbedtls_blowfish_free( mbedtls_blowfish_context *ctx );
+
+/**
+ * \brief          Blowfish key schedule
+ *
+ * \param ctx      Blowfish context to be initialized
+ * \param key      encryption key
+ * \param keybits  must be between 32 and 448 bits
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_BLOWFISH_INVALID_KEY_LENGTH
+ */
+int mbedtls_blowfish_setkey( mbedtls_blowfish_context *ctx, const unsigned char *key,
+                     unsigned int keybits );
+
+/**
+ * \brief          Blowfish-ECB block encryption/decryption
+ *
+ * \param ctx      Blowfish context
+ * \param mode     MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
+ * \param input    8-byte input block
+ * \param output   8-byte output block
+ *
+ * \return         0 if successful
+ */
+int mbedtls_blowfish_crypt_ecb( mbedtls_blowfish_context *ctx,
+                        int mode,
+                        const unsigned char input[MBEDTLS_BLOWFISH_BLOCKSIZE],
+                        unsigned char output[MBEDTLS_BLOWFISH_BLOCKSIZE] );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+/**
+ * \brief          Blowfish-CBC buffer encryption/decryption
+ *                 Length should be a multiple of the block
+ *                 size (8 bytes)
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      Blowfish context
+ * \param mode     MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or
+ *                 MBEDTLS_ERR_BLOWFISH_INVALID_INPUT_LENGTH
+ */
+int mbedtls_blowfish_crypt_cbc( mbedtls_blowfish_context *ctx,
+                        int mode,
+                        size_t length,
+                        unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
+                        const unsigned char *input,
+                        unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+/**
+ * \brief          Blowfish CFB buffer encryption/decryption.
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      Blowfish context
+ * \param mode     MBEDTLS_BLOWFISH_ENCRYPT or MBEDTLS_BLOWFISH_DECRYPT
+ * \param length   length of the input data
+ * \param iv_off   offset in IV (updated after use)
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful
+ */
+int mbedtls_blowfish_crypt_cfb64( mbedtls_blowfish_context *ctx,
+                          int mode,
+                          size_t length,
+                          size_t *iv_off,
+                          unsigned char iv[MBEDTLS_BLOWFISH_BLOCKSIZE],
+                          const unsigned char *input,
+                          unsigned char *output );
+#endif /*MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+/**
+ * \brief               Blowfish-CTR buffer encryption/decryption
+ *
+ * Warning: You have to keep the maximum use of your counter in mind!
+ *
+ * \param ctx           Blowfish context
+ * \param length        The length of the data
+ * \param nc_off        The offset in the current stream_block (for resuming
+ *                      within current cipher stream). The offset pointer to
+ *                      should be 0 at the start of a stream.
+ * \param nonce_counter The 64-bit nonce and counter.
+ * \param stream_block  The saved stream-block for resuming. Is overwritten
+ *                      by the function.
+ * \param input         The input data stream
+ * \param output        The output data stream
+ *
+ * \return         0 if successful
+ */
+int mbedtls_blowfish_crypt_ctr( mbedtls_blowfish_context *ctx,
+                        size_t length,
+                        size_t *nc_off,
+                        unsigned char nonce_counter[MBEDTLS_BLOWFISH_BLOCKSIZE],
+                        unsigned char stream_block[MBEDTLS_BLOWFISH_BLOCKSIZE],
+                        const unsigned char *input,
+                        unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_BLOWFISH_ALT */
+#include "blowfish_alt.h"
+#endif /* MBEDTLS_BLOWFISH_ALT */
+
+#endif /* blowfish.h */

thirdparty/mbedtls/include/mbedtls/camellia.h

+/**
+ * \file camellia.h
+ *
+ * \brief Camellia block cipher
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_CAMELLIA_H
+#define MBEDTLS_CAMELLIA_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define MBEDTLS_CAMELLIA_ENCRYPT     1
+#define MBEDTLS_CAMELLIA_DECRYPT     0
+
+#define MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH           -0x0024  /**< Invalid key length. */
+#define MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH         -0x0026  /**< Invalid data input length. */
+#define MBEDTLS_ERR_CAMELLIA_HW_ACCEL_FAILED              -0x0027  /**< Camellia hardware accelerator failed. */
+
+#if !defined(MBEDTLS_CAMELLIA_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          CAMELLIA context structure
+ */
+typedef struct
+{
+    int nr;                     /*!<  number of rounds  */
+    uint32_t rk[68];            /*!<  CAMELLIA round keys    */
+}
+mbedtls_camellia_context;
+
+/**
+ * \brief          Initialize CAMELLIA context
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ */
+void mbedtls_camellia_init( mbedtls_camellia_context *ctx );
+
+/**
+ * \brief          Clear CAMELLIA context
+ *
+ * \param ctx      CAMELLIA context to be cleared
+ */
+void mbedtls_camellia_free( mbedtls_camellia_context *ctx );
+
+/**
+ * \brief          CAMELLIA key schedule (encryption)
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ * \param key      encryption key
+ * \param keybits  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ */
+int mbedtls_camellia_setkey_enc( mbedtls_camellia_context *ctx, const unsigned char *key,
+                         unsigned int keybits );
+
+/**
+ * \brief          CAMELLIA key schedule (decryption)
+ *
+ * \param ctx      CAMELLIA context to be initialized
+ * \param key      decryption key
+ * \param keybits  must be 128, 192 or 256
+ *
+ * \return         0 if successful, or MBEDTLS_ERR_CAMELLIA_INVALID_KEY_LENGTH
+ */
+int mbedtls_camellia_setkey_dec( mbedtls_camellia_context *ctx, const unsigned char *key,
+                         unsigned int keybits );
+
+/**
+ * \brief          CAMELLIA-ECB block encryption/decryption
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param input    16-byte input block
+ * \param output   16-byte output block
+ *
+ * \return         0 if successful
+ */
+int mbedtls_camellia_crypt_ecb( mbedtls_camellia_context *ctx,
+                    int mode,
+                    const unsigned char input[16],
+                    unsigned char output[16] );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+/**
+ * \brief          CAMELLIA-CBC buffer encryption/decryption
+ *                 Length should be a multiple of the block
+ *                 size (16 bytes)
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or
+ *                 MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ */
+int mbedtls_camellia_crypt_cbc( mbedtls_camellia_context *ctx,
+                    int mode,
+                    size_t length,
+                    unsigned char iv[16],
+                    const unsigned char *input,
+                    unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CBC */
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+/**
+ * \brief          CAMELLIA-CFB128 buffer encryption/decryption
+ *
+ * Note: Due to the nature of CFB you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and CAMELLIE_DECRYPT.
+ *
+ * \note           Upon exit, the content of the IV is updated so that you can
+ *                 call the function same function again on the following
+ *                 block(s) of data and get the same result as if it was
+ *                 encrypted in one call. This allows a "streaming" usage.
+ *                 If on the other hand you need to retain the contents of the
+ *                 IV, you should either save it manually or use the cipher
+ *                 module instead.
+ *
+ * \param ctx      CAMELLIA context
+ * \param mode     MBEDTLS_CAMELLIA_ENCRYPT or MBEDTLS_CAMELLIA_DECRYPT
+ * \param length   length of the input data
+ * \param iv_off   offset in IV (updated after use)
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if successful, or
+ *                 MBEDTLS_ERR_CAMELLIA_INVALID_INPUT_LENGTH
+ */
+int mbedtls_camellia_crypt_cfb128( mbedtls_camellia_context *ctx,
+                       int mode,
+                       size_t length,
+                       size_t *iv_off,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CFB */
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+/**
+ * \brief               CAMELLIA-CTR buffer encryption/decryption
+ *
+ * Warning: You have to keep the maximum use of your counter in mind!
+ *
+ * Note: Due to the nature of CTR you should use the same key schedule for
+ * both encryption and decryption. So a context initialized with
+ * mbedtls_camellia_setkey_enc() for both MBEDTLS_CAMELLIA_ENCRYPT and MBEDTLS_CAMELLIA_DECRYPT.
+ *
+ * \param ctx           CAMELLIA context
+ * \param length        The length of the data
+ * \param nc_off        The offset in the current stream_block (for resuming
+ *                      within current cipher stream). The offset pointer to
+ *                      should be 0 at the start of a stream.
+ * \param nonce_counter The 128-bit nonce and counter.
+ * \param stream_block  The saved stream-block for resuming. Is overwritten
+ *                      by the function.
+ * \param input         The input data stream
+ * \param output        The output data stream
+ *
+ * \return         0 if successful
+ */
+int mbedtls_camellia_crypt_ctr( mbedtls_camellia_context *ctx,
+                       size_t length,
+                       size_t *nc_off,
+                       unsigned char nonce_counter[16],
+                       unsigned char stream_block[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+#endif /* MBEDTLS_CIPHER_MODE_CTR */
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_CAMELLIA_ALT */
+#include "camellia_alt.h"
+#endif /* MBEDTLS_CAMELLIA_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if the test failed
+ */
+int mbedtls_camellia_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* camellia.h */

thirdparty/mbedtls/include/mbedtls/ccm.h

+/**
+ * \file ccm.h
+ *
+ * \brief CCM combines Counter mode encryption with CBC-MAC authentication
+ *        for 128-bit block ciphers.
+ *
+ * Input to CCM includes the following elements:
+ * <ul><li>Payload - data that is both authenticated and encrypted.</li>
+ * <li>Associated data (Adata) - data that is authenticated but not
+ * encrypted, For example, a header.</li>
+ * <li>Nonce - A unique value that is assigned to the payload and the
+ * associated data.</li></ul>
+ *
+ */
+/*
+ *  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef MBEDTLS_CCM_H
+#define MBEDTLS_CCM_H
+
+#include "cipher.h"
+
+#define MBEDTLS_ERR_CCM_BAD_INPUT       -0x000D /**< Bad input parameters to the function. */
+#define MBEDTLS_ERR_CCM_AUTH_FAILED     -0x000F /**< Authenticated decryption failed. */
+#define MBEDTLS_ERR_CCM_HW_ACCEL_FAILED -0x0011 /**< CCM hardware accelerator failed. */
+
+#if !defined(MBEDTLS_CCM_ALT)
+// Regular implementation
+//
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief    The CCM context-type definition. The CCM context is passed
+ *           to the APIs called.
+ */
+typedef struct {
+    mbedtls_cipher_context_t cipher_ctx;    /*!< The cipher context used. */
+}
+mbedtls_ccm_context;
+
+/**
+ * \brief           This function initializes the specified CCM context,
+ *                  to make references valid, and prepare the context
+ *                  for mbedtls_ccm_setkey() or mbedtls_ccm_free().
+ *
+ * \param ctx       The CCM context to initialize.
+ */
+void mbedtls_ccm_init( mbedtls_ccm_context *ctx );
+
+/**
+ * \brief           This function initializes the CCM context set in the
+ *                  \p ctx parameter and sets the encryption key.
+ *
+ * \param ctx       The CCM context to initialize.
+ * \param cipher    The 128-bit block cipher to use.
+ * \param key       The encryption key.
+ * \param keybits   The key size in bits. This must be acceptable by the cipher.
+ *
+ * \return          \c 0 on success, or a cipher-specific error code.
+ */
+int mbedtls_ccm_setkey( mbedtls_ccm_context *ctx,
+                        mbedtls_cipher_id_t cipher,
+                        const unsigned char *key,
+                        unsigned int keybits );
+
+/**
+ * \brief   This function releases and clears the specified CCM context
+ *          and underlying cipher sub-context.
+ *
+ * \param ctx       The CCM context to clear.
+ */
+void mbedtls_ccm_free( mbedtls_ccm_context *ctx );
+
+/**
+ * \brief           This function encrypts a buffer using CCM.
+ *
+ * \param ctx       The CCM context to use for encryption.
+ * \param length    The length of the input data in Bytes.
+ * \param iv        Initialization vector (nonce).
+ * \param iv_len    The length of the IV in Bytes: 7, 8, 9, 10, 11, 12, or 13.
+ * \param add       The additional data field.
+ * \param add_len   The length of additional data in Bytes.
+ *                  Must be less than 2^16 - 2^8.
+ * \param input     The buffer holding the input data.
+ * \param output    The buffer holding the output data.
+ *                  Must be at least \p length Bytes wide.
+ * \param tag       The buffer holding the tag.
+ * \param tag_len   The length of the tag to generate in Bytes:
+ *                  4, 6, 8, 10, 14 or 16.
+ *
+ * \note            The tag is written to a separate buffer. To concatenate
+ *                  the \p tag with the \p output, as done in <em>RFC-3610:
+ *                  Counter with CBC-MAC (CCM)</em>, use
+ *                  \p tag = \p output + \p length, and make sure that the
+ *                  output buffer is at least \p length + \p tag_len wide.
+ *
+ * \return          \c 0 on success.
+ */
+int mbedtls_ccm_encrypt_and_tag( mbedtls_ccm_context *ctx, size_t length,
+                         const unsigned char *iv, size_t iv_len,
+                         const unsigned char *add, size_t add_len,
+                         const unsigned char *input, unsigned char *output,
+                         unsigned char *tag, size_t tag_len );
+
+/**
+ * \brief           This function performs a CCM authenticated decryption of a
+ *                  buffer.
+ *
+ * \param ctx       The CCM context to use for decryption.
+ * \param length    The length of the input data in Bytes.
+ * \param iv        Initialization vector.
+ * \param iv_len    The length of the IV in Bytes: 7, 8, 9, 10, 11, 12, or 13.
+ * \param add       The additional data field.
+ * \param add_len   The length of additional data in Bytes.
+ * \param input     The buffer holding the input data.
+ * \param output    The buffer holding the output data.
+ * \param tag       The buffer holding the tag.
+ * \param tag_len   The length of the tag in Bytes.
+ *
+ * \return          0 if successful and authenticated, or
+ *                  #MBEDTLS_ERR_CCM_AUTH_FAILED if the tag does not match.
+ */
+int mbedtls_ccm_auth_decrypt( mbedtls_ccm_context *ctx, size_t length,
+                      const unsigned char *iv, size_t iv_len,
+                      const unsigned char *add, size_t add_len,
+                      const unsigned char *input, unsigned char *output,
+                      const unsigned char *tag, size_t tag_len );
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_CCM_ALT */
+#include "ccm_alt.h"
+#endif /* MBEDTLS_CCM_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(MBEDTLS_SELF_TEST) && defined(MBEDTLS_AES_C)
+/**
+ * \brief          The CCM checkup routine.
+ *
+ * \return         \c 0 on success, or \c 1 on failure.
+ */
+int mbedtls_ccm_self_test( int verbose );
+#endif /* MBEDTLS_SELF_TEST && MBEDTLS_AES_C */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_CCM_H */

thirdparty/mbedtls/include/mbedtls/certs.h

+/**
+ * \file certs.h
+ *
+ * \brief Sample certificates and DHM parameters for testing
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_CERTS_H
+#define MBEDTLS_CERTS_H
+
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(MBEDTLS_PEM_PARSE_C)
+/* Concatenation of all CA certificates in PEM format if available */
+extern const char   mbedtls_test_cas_pem[];
+extern const size_t mbedtls_test_cas_pem_len;
+#endif
+
+/* List of all CA certificates, terminated by NULL */
+extern const char * mbedtls_test_cas[];
+extern const size_t mbedtls_test_cas_len[];
+
+/*
+ * Convenience for users who just want a certificate:
+ * RSA by default, or ECDSA if RSA is not available
+ */
+extern const char * mbedtls_test_ca_crt;
+extern const size_t mbedtls_test_ca_crt_len;
+extern const char * mbedtls_test_ca_key;
+extern const size_t mbedtls_test_ca_key_len;
+extern const char * mbedtls_test_ca_pwd;
+extern const size_t mbedtls_test_ca_pwd_len;
+extern const char * mbedtls_test_srv_crt;
+extern const size_t mbedtls_test_srv_crt_len;
+extern const char * mbedtls_test_srv_key;
+extern const size_t mbedtls_test_srv_key_len;
+extern const char * mbedtls_test_cli_crt;
+extern const size_t mbedtls_test_cli_crt_len;
+extern const char * mbedtls_test_cli_key;
+extern const size_t mbedtls_test_cli_key_len;
+
+#if defined(MBEDTLS_ECDSA_C)
+extern const char   mbedtls_test_ca_crt_ec[];
+extern const size_t mbedtls_test_ca_crt_ec_len;
+extern const char   mbedtls_test_ca_key_ec[];
+extern const size_t mbedtls_test_ca_key_ec_len;
+extern const char   mbedtls_test_ca_pwd_ec[];
+extern const size_t mbedtls_test_ca_pwd_ec_len;
+extern const char   mbedtls_test_srv_crt_ec[];
+extern const size_t mbedtls_test_srv_crt_ec_len;
+extern const char   mbedtls_test_srv_key_ec[];
+extern const size_t mbedtls_test_srv_key_ec_len;
+extern const char   mbedtls_test_cli_crt_ec[];
+extern const size_t mbedtls_test_cli_crt_ec_len;
+extern const char   mbedtls_test_cli_key_ec[];
+extern const size_t mbedtls_test_cli_key_ec_len;
+#endif
+
+#if defined(MBEDTLS_RSA_C)
+extern const char   mbedtls_test_ca_crt_rsa[];
+extern const size_t mbedtls_test_ca_crt_rsa_len;
+extern const char   mbedtls_test_ca_key_rsa[];
+extern const size_t mbedtls_test_ca_key_rsa_len;
+extern const char   mbedtls_test_ca_pwd_rsa[];
+extern const size_t mbedtls_test_ca_pwd_rsa_len;
+extern const char   mbedtls_test_srv_crt_rsa[];
+extern const size_t mbedtls_test_srv_crt_rsa_len;
+extern const char   mbedtls_test_srv_key_rsa[];
+extern const size_t mbedtls_test_srv_key_rsa_len;
+extern const char   mbedtls_test_cli_crt_rsa[];
+extern const size_t mbedtls_test_cli_crt_rsa_len;
+extern const char   mbedtls_test_cli_key_rsa[];
+extern const size_t mbedtls_test_cli_key_rsa_len;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* certs.h */

thirdparty/mbedtls/include/mbedtls/cipher_internal.h

+/**
+ * \file cipher_internal.h
+ *
+ * \brief Cipher wrappers.
+ *
+ * \author Adriaan de Jong <dejong@fox-it.com>
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_CIPHER_WRAP_H
+#define MBEDTLS_CIPHER_WRAP_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "cipher.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Base cipher information. The non-mode specific functions and values.
+ */
+struct mbedtls_cipher_base_t
+{
+    /** Base Cipher type (e.g. MBEDTLS_CIPHER_ID_AES) */
+    mbedtls_cipher_id_t cipher;
+
+    /** Encrypt using ECB */
+    int (*ecb_func)( void *ctx, mbedtls_operation_t mode,
+                     const unsigned char *input, unsigned char *output );
+
+#if defined(MBEDTLS_CIPHER_MODE_CBC)
+    /** Encrypt using CBC */
+    int (*cbc_func)( void *ctx, mbedtls_operation_t mode, size_t length,
+                     unsigned char *iv, const unsigned char *input,
+                     unsigned char *output );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_CFB)
+    /** Encrypt using CFB (Full length) */
+    int (*cfb_func)( void *ctx, mbedtls_operation_t mode, size_t length, size_t *iv_off,
+                     unsigned char *iv, const unsigned char *input,
+                     unsigned char *output );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_CTR)
+    /** Encrypt using CTR */
+    int (*ctr_func)( void *ctx, size_t length, size_t *nc_off,
+                     unsigned char *nonce_counter, unsigned char *stream_block,
+                     const unsigned char *input, unsigned char *output );
+#endif
+
+#if defined(MBEDTLS_CIPHER_MODE_STREAM)
+    /** Encrypt using STREAM */
+    int (*stream_func)( void *ctx, size_t length,
+                        const unsigned char *input, unsigned char *output );
+#endif
+
+    /** Set key for encryption purposes */
+    int (*setkey_enc_func)( void *ctx, const unsigned char *key,
+                            unsigned int key_bitlen );
+
+    /** Set key for decryption purposes */
+    int (*setkey_dec_func)( void *ctx, const unsigned char *key,
+                            unsigned int key_bitlen);
+
+    /** Allocate a new context */
+    void * (*ctx_alloc_func)( void );
+
+    /** Free the given context */
+    void (*ctx_free_func)( void *ctx );
+
+};
+
+typedef struct
+{
+    mbedtls_cipher_type_t type;
+    const mbedtls_cipher_info_t *info;
+} mbedtls_cipher_definition_t;
+
+extern const mbedtls_cipher_definition_t mbedtls_cipher_definitions[];
+
+extern int mbedtls_cipher_supported[];
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_CIPHER_WRAP_H */

thirdparty/mbedtls/include/mbedtls/cmac.h

+/**
+ * \file cmac.h
+ *
+ * \brief The Cipher-based Message Authentication Code (CMAC) Mode for
+ *        Authentication.
+ */
+/*
+ *  Copyright (C) 2015-2018, Arm Limited (or its affiliates), All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef MBEDTLS_CMAC_H
+#define MBEDTLS_CMAC_H
+
+#include "mbedtls/cipher.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define MBEDTLS_ERR_CMAC_HW_ACCEL_FAILED -0x007A  /**< CMAC hardware accelerator failed. */
+
+#define MBEDTLS_AES_BLOCK_SIZE          16
+#define MBEDTLS_DES3_BLOCK_SIZE         8
+
+#if defined(MBEDTLS_AES_C)
+#define MBEDTLS_CIPHER_BLKSIZE_MAX      16  /* The longest block used by CMAC is that of AES. */
+#else
+#define MBEDTLS_CIPHER_BLKSIZE_MAX      8   /* The longest block used by CMAC is that of 3DES. */
+#endif
+
+#if !defined(MBEDTLS_CMAC_ALT)
+
+/**
+ * The CMAC context structure.
+ */
+struct mbedtls_cmac_context_t
+{
+    /** The internal state of the CMAC algorithm.  */
+    unsigned char       state[MBEDTLS_CIPHER_BLKSIZE_MAX];
+
+    /** Unprocessed data - either data that was not block aligned and is still
+     *  pending processing, or the final block. */
+    unsigned char       unprocessed_block[MBEDTLS_CIPHER_BLKSIZE_MAX];
+
+    /** The length of data pending processing. */
+    size_t              unprocessed_len;
+};
+
+/**
+ * \brief               This function sets the CMAC key, and prepares to authenticate
+ *                      the input data.
+ *                      Must be called with an initialized cipher context.
+ *
+ * \param ctx           The cipher context used for the CMAC operation, initialized
+ *                      as one of the following types:<ul>
+ *                      <li>MBEDTLS_CIPHER_AES_128_ECB</li>
+ *                      <li>MBEDTLS_CIPHER_AES_192_ECB</li>
+ *                      <li>MBEDTLS_CIPHER_AES_256_ECB</li>
+ *                      <li>MBEDTLS_CIPHER_DES_EDE3_ECB</li></ul>
+ * \param key           The CMAC key.
+ * \param keybits       The length of the CMAC key in bits.
+ *                      Must be supported by the cipher.
+ *
+ * \return              \c 0 on success, or a cipher-specific error code.
+ */
+int mbedtls_cipher_cmac_starts( mbedtls_cipher_context_t *ctx,
+                                const unsigned char *key, size_t keybits );
+
+/**
+ * \brief               This function feeds an input buffer into an ongoing CMAC
+ *                      computation.
+ *
+ *                      It is called between mbedtls_cipher_cmac_starts() or
+ *                      mbedtls_cipher_cmac_reset(), and mbedtls_cipher_cmac_finish().
+ *                      Can be called repeatedly.
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ * \param input         The buffer holding the input data.
+ * \param ilen          The length of the input data.
+ *
+ * \returns             \c 0 on success, or #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_update( mbedtls_cipher_context_t *ctx,
+                                const unsigned char *input, size_t ilen );
+
+/**
+ * \brief               This function finishes the CMAC operation, and writes
+ *                      the result to the output buffer.
+ *
+ *                      It is called after mbedtls_cipher_cmac_update().
+ *                      It can be followed by mbedtls_cipher_cmac_reset() and
+ *                      mbedtls_cipher_cmac_update(), or mbedtls_cipher_free().
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ * \param output        The output buffer for the CMAC checksum result.
+ *
+ * \returns             \c 0 on success, or #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_finish( mbedtls_cipher_context_t *ctx,
+                                unsigned char *output );
+
+/**
+ * \brief               This function prepares the authentication of another
+ *                      message with the same key as the previous CMAC
+ *                      operation.
+ *
+ *                      It is called after mbedtls_cipher_cmac_finish()
+ *                      and before mbedtls_cipher_cmac_update().
+ *
+ * \param ctx           The cipher context used for the CMAC operation.
+ *
+ * \returns             \c 0 on success, or #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac_reset( mbedtls_cipher_context_t *ctx );
+
+/**
+ * \brief               This function calculates the full generic CMAC
+ *                      on the input buffer with the provided key.
+ *
+ *                      The function allocates the context, performs the
+ *                      calculation, and frees the context.
+ *
+ *                      The CMAC result is calculated as
+ *                      output = generic CMAC(cmac key, input buffer).
+ *
+ *
+ * \param cipher_info   The cipher information.
+ * \param key           The CMAC key.
+ * \param keylen        The length of the CMAC key in bits.
+ * \param input         The buffer holding the input data.
+ * \param ilen          The length of the input data.
+ * \param output        The buffer for the generic CMAC result.
+ *
+ * \returns             \c 0 on success, or #MBEDTLS_ERR_MD_BAD_INPUT_DATA
+ *                      if parameter verification fails.
+ */
+int mbedtls_cipher_cmac( const mbedtls_cipher_info_t *cipher_info,
+                         const unsigned char *key, size_t keylen,
+                         const unsigned char *input, size_t ilen,
+                         unsigned char *output );
+
+#if defined(MBEDTLS_AES_C)
+/**
+ * \brief           This function implements the AES-CMAC-PRF-128 pseudorandom
+ *                  function, as defined in
+ *                  <em>RFC-4615: The Advanced Encryption Standard-Cipher-based
+ *                  Message Authentication Code-Pseudo-Random Function-128
+ *                  (AES-CMAC-PRF-128) Algorithm for the Internet Key
+ *                  Exchange Protocol (IKE).</em>
+ *
+ * \param key       The key to use.
+ * \param key_len   The key length in Bytes.
+ * \param input     The buffer holding the input data.
+ * \param in_len    The length of the input data in Bytes.
+ * \param output    The buffer holding the generated 16 Bytes of
+ *                  pseudorandom output.
+ *
+ * \return          \c 0 on success.
+ */
+int mbedtls_aes_cmac_prf_128( const unsigned char *key, size_t key_len,
+                              const unsigned char *input, size_t in_len,
+                              unsigned char output[16] );
+#endif /* MBEDTLS_AES_C */
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* !MBEDTLS_CMAC_ALT */
+#include "cmac_alt.h"
+#endif /* !MBEDTLS_CMAC_ALT */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(MBEDTLS_SELF_TEST) && ( defined(MBEDTLS_AES_C) || defined(MBEDTLS_DES_C) )
+/**
+ * \brief          The CMAC checkup routine.
+ *
+ * \return         \c 0 on success, or \c 1 on failure.
+ */
+int mbedtls_cmac_self_test( int verbose );
+#endif /* MBEDTLS_SELF_TEST && ( MBEDTLS_AES_C || MBEDTLS_DES_C ) */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_CMAC_H */

thirdparty/mbedtls/include/mbedtls/debug.h

+/**
+ * \file debug.h
+ *
+ * \brief Functions for controlling and providing debug output from the library.
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_DEBUG_H
+#define MBEDTLS_DEBUG_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "ssl.h"
+
+#if defined(MBEDTLS_ECP_C)
+#include "ecp.h"
+#endif
+
+#if defined(MBEDTLS_DEBUG_C)
+
+#define MBEDTLS_DEBUG_STRIP_PARENS( ... )   __VA_ARGS__
+
+#define MBEDTLS_SSL_DEBUG_MSG( level, args )                    \
+    mbedtls_debug_print_msg( ssl, level, __FILE__, __LINE__,    \
+                             MBEDTLS_DEBUG_STRIP_PARENS args )
+
+#define MBEDTLS_SSL_DEBUG_RET( level, text, ret )                \
+    mbedtls_debug_print_ret( ssl, level, __FILE__, __LINE__, text, ret )
+
+#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len )           \
+    mbedtls_debug_print_buf( ssl, level, __FILE__, __LINE__, text, buf, len )
+
+#if defined(MBEDTLS_BIGNUM_C)
+#define MBEDTLS_SSL_DEBUG_MPI( level, text, X )                  \
+    mbedtls_debug_print_mpi( ssl, level, __FILE__, __LINE__, text, X )
+#endif
+
+#if defined(MBEDTLS_ECP_C)
+#define MBEDTLS_SSL_DEBUG_ECP( level, text, X )                  \
+    mbedtls_debug_print_ecp( ssl, level, __FILE__, __LINE__, text, X )
+#endif
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C)
+#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt )                \
+    mbedtls_debug_print_crt( ssl, level, __FILE__, __LINE__, text, crt )
+#endif
+
+#else /* MBEDTLS_DEBUG_C */
+
+#define MBEDTLS_SSL_DEBUG_MSG( level, args )            do { } while( 0 )
+#define MBEDTLS_SSL_DEBUG_RET( level, text, ret )       do { } while( 0 )
+#define MBEDTLS_SSL_DEBUG_BUF( level, text, buf, len )  do { } while( 0 )
+#define MBEDTLS_SSL_DEBUG_MPI( level, text, X )         do { } while( 0 )
+#define MBEDTLS_SSL_DEBUG_ECP( level, text, X )         do { } while( 0 )
+#define MBEDTLS_SSL_DEBUG_CRT( level, text, crt )       do { } while( 0 )
+
+#endif /* MBEDTLS_DEBUG_C */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief   Set the threshold error level to handle globally all debug output.
+ *          Debug messages that have a level over the threshold value are
+ *          discarded.
+ *          (Default value: 0 = No debug )
+ *
+ * \param threshold     theshold level of messages to filter on. Messages at a
+ *                      higher level will be discarded.
+ *                          - Debug levels
+ *                              - 0 No debug
+ *                              - 1 Error
+ *                              - 2 State change
+ *                              - 3 Informational
+ *                              - 4 Verbose
+ */
+void mbedtls_debug_set_threshold( int threshold );
+
+/**
+ * \brief    Print a message to the debug output. This function is always used
+ *          through the MBEDTLS_SSL_DEBUG_MSG() macro, which supplies the ssl
+ *          context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the message has occurred in
+ * \param line      line number the message has occurred at
+ * \param format    format specifier, in printf format
+ * \param ...       variables used by the format specifier
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_msg( const mbedtls_ssl_context *ssl, int level,
+                              const char *file, int line,
+                              const char *format, ... );
+
+/**
+ * \brief   Print the return value of a function to the debug output. This
+ *          function is always used through the MBEDTLS_SSL_DEBUG_RET() macro,
+ *          which supplies the ssl context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the error has occurred in
+ * \param line      line number the error has occurred in
+ * \param text      the name of the function that returned the error
+ * \param ret       the return code value
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_ret( const mbedtls_ssl_context *ssl, int level,
+                      const char *file, int line,
+                      const char *text, int ret );
+
+/**
+ * \brief   Output a buffer of size len bytes to the debug output. This function
+ *          is always used through the MBEDTLS_SSL_DEBUG_BUF() macro,
+ *          which supplies the ssl context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the error has occurred in
+ * \param line      line number the error has occurred in
+ * \param text      a name or label for the buffer being dumped. Normally the
+ *                  variable or buffer name
+ * \param buf       the buffer to be outputted
+ * \param len       length of the buffer
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_buf( const mbedtls_ssl_context *ssl, int level,
+                      const char *file, int line, const char *text,
+                      const unsigned char *buf, size_t len );
+
+#if defined(MBEDTLS_BIGNUM_C)
+/**
+ * \brief   Print a MPI variable to the debug output. This function is always
+ *          used through the MBEDTLS_SSL_DEBUG_MPI() macro, which supplies the
+ *          ssl context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the error has occurred in
+ * \param line      line number the error has occurred in
+ * \param text      a name or label for the MPI being output. Normally the
+ *                  variable name
+ * \param X         the MPI variable
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_mpi( const mbedtls_ssl_context *ssl, int level,
+                      const char *file, int line,
+                      const char *text, const mbedtls_mpi *X );
+#endif
+
+#if defined(MBEDTLS_ECP_C)
+/**
+ * \brief   Print an ECP point to the debug output. This function is always
+ *          used through the MBEDTLS_SSL_DEBUG_ECP() macro, which supplies the
+ *          ssl context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the error has occurred in
+ * \param line      line number the error has occurred in
+ * \param text      a name or label for the ECP point being output. Normally the
+ *                  variable name
+ * \param X         the ECP point
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_ecp( const mbedtls_ssl_context *ssl, int level,
+                      const char *file, int line,
+                      const char *text, const mbedtls_ecp_point *X );
+#endif
+
+#if defined(MBEDTLS_X509_CRT_PARSE_C)
+/**
+ * \brief   Print a X.509 certificate structure to the debug output. This
+ *          function is always used through the MBEDTLS_SSL_DEBUG_CRT() macro,
+ *          which supplies the ssl context, file and line number parameters.
+ *
+ * \param ssl       SSL context
+ * \param level     error level of the debug message
+ * \param file      file the error has occurred in
+ * \param line      line number the error has occurred in
+ * \param text      a name or label for the certificate being output
+ * \param crt       X.509 certificate structure
+ *
+ * \attention       This function is intended for INTERNAL usage within the
+ *                  library only.
+ */
+void mbedtls_debug_print_crt( const mbedtls_ssl_context *ssl, int level,
+                      const char *file, int line,
+                      const char *text, const mbedtls_x509_crt *crt );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* debug.h */
+

thirdparty/mbedtls/include/mbedtls/ecdh.h

+/**
+ * \file ecdh.h
+ *
+ * \brief The Elliptic Curve Diffie-Hellman (ECDH) protocol APIs.
+ *
+ * ECDH is an anonymous key agreement protocol allowing two parties to
+ * establish a shared secret over an insecure channel. Each party must have an
+ * elliptic-curve public–private key pair.
+ *
+ * For more information, see <em>NIST SP 800-56A Rev. 2: Recommendation for
+ * Pair-Wise Key Establishment Schemes Using Discrete Logarithm
+ * Cryptography</em>.
+ */
+/*
+ *  Copyright (C) 2006-2018, Arm Limited (or its affiliates), All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of Mbed TLS (https://tls.mbed.org)
+ */
+
+#ifndef MBEDTLS_ECDH_H
+#define MBEDTLS_ECDH_H
+
+#include "ecp.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Defines the source of the imported EC key:
+ * <ul><li>Our key.</li>
+ * <li>The key of the peer.</li></ul>
+ */
+typedef enum
+{
+    MBEDTLS_ECDH_OURS,
+    MBEDTLS_ECDH_THEIRS,
+} mbedtls_ecdh_side;
+
+/**
+ * \brief           The ECDH context structure.
+ */
+typedef struct
+{
+    mbedtls_ecp_group grp;   /*!< The elliptic curve used. */
+    mbedtls_mpi d;           /*!< The private key. */
+    mbedtls_ecp_point Q;     /*!< The public key. */
+    mbedtls_ecp_point Qp;    /*!< The value of the public key of the peer. */
+    mbedtls_mpi z;           /*!< The shared secret. */
+    int point_format;        /*!< The format of point export in TLS messages. */
+    mbedtls_ecp_point Vi;    /*!< The blinding value. */
+    mbedtls_ecp_point Vf;    /*!< The unblinding value. */
+    mbedtls_mpi _d;          /*!< The previous \p d. */
+}
+mbedtls_ecdh_context;
+
+/**
+ * \brief           This function generates an ECDH keypair on an elliptic
+ *                  curve.
+ *
+ *                  This function performs the first of two core computations
+ *                  implemented during the ECDH key exchange. The second core
+ *                  computation is performed by mbedtls_ecdh_compute_shared().
+ *
+ * \param grp       The ECP group.
+ * \param d         The destination MPI (private key).
+ * \param Q         The destination point (public key).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG parameter.
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX or
+ *                  \c MBEDTLS_MPI_XXX error code on failure.
+ *
+ * \see             ecp.h
+ */
+int mbedtls_ecdh_gen_public( mbedtls_ecp_group *grp, mbedtls_mpi *d, mbedtls_ecp_point *Q,
+                     int (*f_rng)(void *, unsigned char *, size_t),
+                     void *p_rng );
+
+/**
+ * \brief           This function computes the shared secret.
+ *
+ *                  This function performs the second of two core computations
+ *                  implemented during the ECDH key exchange. The first core
+ *                  computation is performed by mbedtls_ecdh_gen_public().
+ *
+ * \param grp       The ECP group.
+ * \param z         The destination MPI (shared secret).
+ * \param Q         The public key from another party.
+ * \param d         Our secret exponent (private key).
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG parameter.
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX or
+ *                  \c MBEDTLS_MPI_XXX error code on failure.
+ *
+ * \see             ecp.h
+ *
+ * \note            If \p f_rng is not NULL, it is used to implement
+ *                  countermeasures against potential elaborate timing
+ *                  attacks. For more information, see mbedtls_ecp_mul().
+ */
+int mbedtls_ecdh_compute_shared( mbedtls_ecp_group *grp, mbedtls_mpi *z,
+                         const mbedtls_ecp_point *Q, const mbedtls_mpi *d,
+                         int (*f_rng)(void *, unsigned char *, size_t),
+                         void *p_rng );
+
+/**
+ * \brief           This function initializes an ECDH context.
+ *
+ * \param ctx       The ECDH context to initialize.
+ */
+void mbedtls_ecdh_init( mbedtls_ecdh_context *ctx );
+
+/**
+ * \brief           This function frees a context.
+ *
+ * \param ctx       The context to free.
+ */
+void mbedtls_ecdh_free( mbedtls_ecdh_context *ctx );
+
+/**
+ * \brief           This function generates a public key and a TLS
+ *                  ServerKeyExchange payload.
+ *
+ *                  This is the first function used by a TLS server for ECDHE
+ *                  ciphersuites.
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of characters written.
+ * \param buf       The destination buffer.
+ * \param blen      The length of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG parameter.
+ *
+ * \note            This function assumes that the ECP group (grp) of the
+ *                  \p ctx context has already been properly set,
+ *                  for example, using mbedtls_ecp_group_load().
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *                  on failure.
+ *
+ * \see             ecp.h
+ */
+int mbedtls_ecdh_make_params( mbedtls_ecdh_context *ctx, size_t *olen,
+                      unsigned char *buf, size_t blen,
+                      int (*f_rng)(void *, unsigned char *, size_t),
+                      void *p_rng );
+
+/**
+ * \brief           This function parses and processes a TLS ServerKeyExhange
+ *                  payload.
+ *
+ *                  This is the first function used by a TLS client for ECDHE
+ *                  ciphersuites.
+ *
+ * \param ctx       The ECDH context.
+ * \param buf       The pointer to the start of the input buffer.
+ * \param end       The address for one Byte past the end of the buffer.
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *                  on failure.
+ *
+ * \see             ecp.h
+ */
+int mbedtls_ecdh_read_params( mbedtls_ecdh_context *ctx,
+                      const unsigned char **buf, const unsigned char *end );
+
+/**
+ * \brief           This function sets up an ECDH context from an EC key.
+ *
+ *                  It is used by clients and servers in place of the
+ *                  ServerKeyEchange for static ECDH, and imports ECDH
+ *                  parameters from the EC key information of a certificate.
+ *
+ * \param ctx       The ECDH context to set up.
+ * \param key       The EC key to use.
+ * \param side      Defines the source of the key:
+ *                  <ul><li>1: Our key.</li>
+                    <li>0: The key of the peer.</li></ul>
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *                  on failure.
+ *
+ * \see             ecp.h
+ */
+int mbedtls_ecdh_get_params( mbedtls_ecdh_context *ctx, const mbedtls_ecp_keypair *key,
+                     mbedtls_ecdh_side side );
+
+/**
+ * \brief           This function generates a public key and a TLS
+ *                  ClientKeyExchange payload.
+ *
+ *                  This is the second function used by a TLS client for ECDH(E)
+ *                  ciphersuites.
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of Bytes written.
+ * \param buf       The destination buffer.
+ * \param blen      The size of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG parameter.
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *                  on failure.
+ *
+ * \see             ecp.h
+ */
+int mbedtls_ecdh_make_public( mbedtls_ecdh_context *ctx, size_t *olen,
+                      unsigned char *buf, size_t blen,
+                      int (*f_rng)(void *, unsigned char *, size_t),
+                      void *p_rng );
+
+/**
+ * \brief       This function parses and processes a TLS ClientKeyExchange
+ *              payload.
+ *
+ *              This is the second function used by a TLS server for ECDH(E)
+ *              ciphersuites.
+ *
+ * \param ctx   The ECDH context.
+ * \param buf   The start of the input buffer.
+ * \param blen  The length of the input buffer.
+ *
+ * \return      \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *              on failure.
+ *
+ * \see         ecp.h
+ */
+int mbedtls_ecdh_read_public( mbedtls_ecdh_context *ctx,
+                      const unsigned char *buf, size_t blen );
+
+/**
+ * \brief           This function derives and exports the shared secret.
+ *
+ *                  This is the last function used by both TLS client
+ *                  and servers.
+ *
+ * \param ctx       The ECDH context.
+ * \param olen      The number of Bytes written.
+ * \param buf       The destination buffer.
+ * \param blen      The length of the destination buffer.
+ * \param f_rng     The RNG function.
+ * \param p_rng     The RNG parameter.
+ *
+ * \return          \c 0 on success, or an \c MBEDTLS_ERR_ECP_XXX error code
+ *                  on failure.
+ *
+ * \see             ecp.h
+ *
+ * \note            If \p f_rng is not NULL, it is used to implement
+ *                  countermeasures against potential elaborate timing
+ *                  attacks. For more information, see mbedtls_ecp_mul().
+ */
+int mbedtls_ecdh_calc_secret( mbedtls_ecdh_context *ctx, size_t *olen,
+                      unsigned char *buf, size_t blen,
+                      int (*f_rng)(void *, unsigned char *, size_t),
+                      void *p_rng );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* ecdh.h */

thirdparty/mbedtls/include/mbedtls/ecjpake.h

+/**
+ * \file ecjpake.h
+ *
+ * \brief Elliptic curve J-PAKE
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ECJPAKE_H
+#define MBEDTLS_ECJPAKE_H
+
+/*
+ * J-PAKE is a password-authenticated key exchange that allows deriving a
+ * strong shared secret from a (potentially low entropy) pre-shared
+ * passphrase, with forward secrecy and mutual authentication.
+ * https://en.wikipedia.org/wiki/Password_Authenticated_Key_Exchange_by_Juggling
+ *
+ * This file implements the Elliptic Curve variant of J-PAKE,
+ * as defined in Chapter 7.4 of the Thread v1.0 Specification,
+ * available to members of the Thread Group http://threadgroup.org/
+ *
+ * As the J-PAKE algorithm is inherently symmetric, so is our API.
+ * Each party needs to send its first round message, in any order, to the
+ * other party, then each sends its second round message, in any order.
+ * The payloads are serialized in a way suitable for use in TLS, but could
+ * also be use outside TLS.
+ */
+
+#include "ecp.h"
+#include "md.h"
+
+#if !defined(MBEDTLS_ECJPAKE_ALT)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Roles in the EC J-PAKE exchange
+ */
+typedef enum {
+    MBEDTLS_ECJPAKE_CLIENT = 0,         /**< Client                         */
+    MBEDTLS_ECJPAKE_SERVER,             /**< Server                         */
+} mbedtls_ecjpake_role;
+
+/**
+ * EC J-PAKE context structure.
+ *
+ * J-PAKE is a symmetric protocol, except for the identifiers used in
+ * Zero-Knowledge Proofs, and the serialization of the second message
+ * (KeyExchange) as defined by the Thread spec.
+ *
+ * In order to benefit from this symmetry, we choose a different naming
+ * convetion from the Thread v1.0 spec. Correspondance is indicated in the
+ * description as a pair C: client name, S: server name
+ */
+typedef struct
+{
+    const mbedtls_md_info_t *md_info;   /**< Hash to use                    */
+    mbedtls_ecp_group grp;              /**< Elliptic curve                 */
+    mbedtls_ecjpake_role role;          /**< Are we client or server?       */
+    int point_format;                   /**< Format for point export        */
+
+    mbedtls_ecp_point Xm1;              /**< My public key 1   C: X1, S: X3 */
+    mbedtls_ecp_point Xm2;              /**< My public key 2   C: X2, S: X4 */
+    mbedtls_ecp_point Xp1;              /**< Peer public key 1 C: X3, S: X1 */
+    mbedtls_ecp_point Xp2;              /**< Peer public key 2 C: X4, S: X2 */
+    mbedtls_ecp_point Xp;               /**< Peer public key   C: Xs, S: Xc */
+
+    mbedtls_mpi xm1;                    /**< My private key 1  C: x1, S: x3 */
+    mbedtls_mpi xm2;                    /**< My private key 2  C: x2, S: x4 */
+
+    mbedtls_mpi s;                      /**< Pre-shared secret (passphrase) */
+} mbedtls_ecjpake_context;
+
+/**
+ * \brief           Initialize a context
+ *                  (just makes it ready for setup() or free()).
+ *
+ * \param ctx       context to initialize
+ */
+void mbedtls_ecjpake_init( mbedtls_ecjpake_context *ctx );
+
+/**
+ * \brief           Set up a context for use
+ *
+ * \note            Currently the only values for hash/curve allowed by the
+ *                  standard are MBEDTLS_MD_SHA256/MBEDTLS_ECP_DP_SECP256R1.
+ *
+ * \param ctx       context to set up
+ * \param role      Our role: client or server
+ * \param hash      hash function to use (MBEDTLS_MD_XXX)
+ * \param curve     elliptic curve identifier (MBEDTLS_ECP_DP_XXX)
+ * \param secret    pre-shared secret (passphrase)
+ * \param len       length of the shared secret
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_setup( mbedtls_ecjpake_context *ctx,
+                           mbedtls_ecjpake_role role,
+                           mbedtls_md_type_t hash,
+                           mbedtls_ecp_group_id curve,
+                           const unsigned char *secret,
+                           size_t len );
+
+/**
+ * \brief           Check if a context is ready for use
+ *
+ * \param ctx       Context to check
+ *
+ * \return          0 if the context is ready for use,
+ *                  MBEDTLS_ERR_ECP_BAD_INPUT_DATA otherwise
+ */
+int mbedtls_ecjpake_check( const mbedtls_ecjpake_context *ctx );
+
+/**
+ * \brief           Generate and write the first round message
+ *                  (TLS: contents of the Client/ServerHello extension,
+ *                  excluding extension type and length bytes)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_write_round_one( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Read and process the first round message
+ *                  (TLS: contents of the Client/ServerHello extension,
+ *                  excluding extension type and length bytes)
+ *
+ * \param ctx       Context to use
+ * \param buf       Pointer to extension contents
+ * \param len       Extension length
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_read_round_one( mbedtls_ecjpake_context *ctx,
+                                    const unsigned char *buf,
+                                    size_t len );
+
+/**
+ * \brief           Generate and write the second round message
+ *                  (TLS: contents of the Client/ServerKeyExchange)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_write_round_two( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Read and process the second round message
+ *                  (TLS: contents of the Client/ServerKeyExchange)
+ *
+ * \param ctx       Context to use
+ * \param buf       Pointer to the message
+ * \param len       Message length
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_read_round_two( mbedtls_ecjpake_context *ctx,
+                                    const unsigned char *buf,
+                                    size_t len );
+
+/**
+ * \brief           Derive the shared secret
+ *                  (TLS: Pre-Master Secret)
+ *
+ * \param ctx       Context to use
+ * \param buf       Buffer to write the contents to
+ * \param len       Buffer size
+ * \param olen      Will be updated with the number of bytes written
+ * \param f_rng     RNG function
+ * \param p_rng     RNG parameter
+ *
+ * \return          0 if successfull,
+ *                  a negative error code otherwise
+ */
+int mbedtls_ecjpake_derive_secret( mbedtls_ecjpake_context *ctx,
+                            unsigned char *buf, size_t len, size_t *olen,
+                            int (*f_rng)(void *, unsigned char *, size_t),
+                            void *p_rng );
+
+/**
+ * \brief           Free a context's content
+ *
+ * \param ctx       context to free
+ */
+void mbedtls_ecjpake_free( mbedtls_ecjpake_context *ctx );
+
+#ifdef __cplusplus
+}
+#endif
+
+#else  /* MBEDTLS_ECJPAKE_ALT */
+#include "ecjpake_alt.h"
+#endif /* MBEDTLS_ECJPAKE_ALT */
+
+#if defined(MBEDTLS_SELF_TEST)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_ecjpake_self_test( int verbose );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_SELF_TEST */
+
+#endif /* ecjpake.h */

thirdparty/mbedtls/include/mbedtls/entropy.h

+/**
+ * \file entropy.h
+ *
+ * \brief Entropy accumulator implementation
+ */
+/*
+ *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ENTROPY_H
+#define MBEDTLS_ENTROPY_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+
+#if defined(MBEDTLS_SHA512_C) && !defined(MBEDTLS_ENTROPY_FORCE_SHA256)
+#include "sha512.h"
+#define MBEDTLS_ENTROPY_SHA512_ACCUMULATOR
+#else
+#if defined(MBEDTLS_SHA256_C)
+#define MBEDTLS_ENTROPY_SHA256_ACCUMULATOR
+#include "sha256.h"
+#endif
+#endif
+
+#if defined(MBEDTLS_THREADING_C)
+#include "threading.h"
+#endif
+
+#if defined(MBEDTLS_HAVEGE_C)
+#include "havege.h"
+#endif
+
+#define MBEDTLS_ERR_ENTROPY_SOURCE_FAILED                 -0x003C  /**< Critical entropy source failure. */
+#define MBEDTLS_ERR_ENTROPY_MAX_SOURCES                   -0x003E  /**< No more sources can be added. */
+#define MBEDTLS_ERR_ENTROPY_NO_SOURCES_DEFINED            -0x0040  /**< No sources have been added to poll. */
+#define MBEDTLS_ERR_ENTROPY_NO_STRONG_SOURCE              -0x003D  /**< No strong sources have been added to poll. */
+#define MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR                 -0x003F  /**< Read/write error in file. */
+
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(MBEDTLS_ENTROPY_MAX_SOURCES)
+#define MBEDTLS_ENTROPY_MAX_SOURCES     20      /**< Maximum number of sources supported */
+#endif
+
+#if !defined(MBEDTLS_ENTROPY_MAX_GATHER)
+#define MBEDTLS_ENTROPY_MAX_GATHER      128     /**< Maximum amount requested from entropy sources */
+#endif
+
+/* \} name SECTION: Module settings */
+
+#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR)
+#define MBEDTLS_ENTROPY_BLOCK_SIZE      64      /**< Block size of entropy accumulator (SHA-512) */
+#else
+#define MBEDTLS_ENTROPY_BLOCK_SIZE      32      /**< Block size of entropy accumulator (SHA-256) */
+#endif
+
+#define MBEDTLS_ENTROPY_MAX_SEED_SIZE   1024    /**< Maximum size of seed we read from seed file */
+#define MBEDTLS_ENTROPY_SOURCE_MANUAL   MBEDTLS_ENTROPY_MAX_SOURCES
+
+#define MBEDTLS_ENTROPY_SOURCE_STRONG   1       /**< Entropy source is strong   */
+#define MBEDTLS_ENTROPY_SOURCE_WEAK     0       /**< Entropy source is weak     */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief           Entropy poll callback pointer
+ *
+ * \param data      Callback-specific data pointer
+ * \param output    Data to fill
+ * \param len       Maximum size to provide
+ * \param olen      The actual amount of bytes put into the buffer (Can be 0)
+ *
+ * \return          0 if no critical failures occurred,
+ *                  MBEDTLS_ERR_ENTROPY_SOURCE_FAILED otherwise
+ */
+typedef int (*mbedtls_entropy_f_source_ptr)(void *data, unsigned char *output, size_t len,
+                            size_t *olen);
+
+/**
+ * \brief           Entropy source state
+ */
+typedef struct
+{
+    mbedtls_entropy_f_source_ptr    f_source;   /**< The entropy source callback */
+    void *          p_source;   /**< The callback data pointer */
+    size_t          size;       /**< Amount received in bytes */
+    size_t          threshold;  /**< Minimum bytes required before release */
+    int             strong;     /**< Is the source strong? */
+}
+mbedtls_entropy_source_state;
+
+/**
+ * \brief           Entropy context structure
+ */
+typedef struct
+{
+    int accumulator_started;
+#if defined(MBEDTLS_ENTROPY_SHA512_ACCUMULATOR)
+    mbedtls_sha512_context  accumulator;
+#else
+    mbedtls_sha256_context  accumulator;
+#endif
+    int             source_count;
+    mbedtls_entropy_source_state    source[MBEDTLS_ENTROPY_MAX_SOURCES];
+#if defined(MBEDTLS_HAVEGE_C)
+    mbedtls_havege_state    havege_data;
+#endif
+#if defined(MBEDTLS_THREADING_C)
+    mbedtls_threading_mutex_t mutex;    /*!< mutex                  */
+#endif
+#if defined(MBEDTLS_ENTROPY_NV_SEED)
+    int initial_entropy_run;
+#endif
+}
+mbedtls_entropy_context;
+
+/**
+ * \brief           Initialize the context
+ *
+ * \param ctx       Entropy context to initialize
+ */
+void mbedtls_entropy_init( mbedtls_entropy_context *ctx );
+
+/**
+ * \brief           Free the data in the context
+ *
+ * \param ctx       Entropy context to free
+ */
+void mbedtls_entropy_free( mbedtls_entropy_context *ctx );
+
+/**
+ * \brief           Adds an entropy source to poll
+ *                  (Thread-safe if MBEDTLS_THREADING_C is enabled)
+ *
+ * \param ctx       Entropy context
+ * \param f_source  Entropy function
+ * \param p_source  Function data
+ * \param threshold Minimum required from source before entropy is released
+ *                  ( with mbedtls_entropy_func() ) (in bytes)
+ * \param strong    MBEDTLS_ENTROPY_SOURCE_STRONG or
+ *                  MBEDTSL_ENTROPY_SOURCE_WEAK.
+ *                  At least one strong source needs to be added.
+ *                  Weaker sources (such as the cycle counter) can be used as
+ *                  a complement.
+ *
+ * \return          0 if successful or MBEDTLS_ERR_ENTROPY_MAX_SOURCES
+ */
+int mbedtls_entropy_add_source( mbedtls_entropy_context *ctx,
+                        mbedtls_entropy_f_source_ptr f_source, void *p_source,
+                        size_t threshold, int strong );
+
+/**
+ * \brief           Trigger an extra gather poll for the accumulator
+ *                  (Thread-safe if MBEDTLS_THREADING_C is enabled)
+ *
+ * \param ctx       Entropy context
+ *
+ * \return          0 if successful, or MBEDTLS_ERR_ENTROPY_SOURCE_FAILED
+ */
+int mbedtls_entropy_gather( mbedtls_entropy_context *ctx );
+
+/**
+ * \brief           Retrieve entropy from the accumulator
+ *                  (Maximum length: MBEDTLS_ENTROPY_BLOCK_SIZE)
+ *                  (Thread-safe if MBEDTLS_THREADING_C is enabled)
+ *
+ * \param data      Entropy context
+ * \param output    Buffer to fill
+ * \param len       Number of bytes desired, must be at most MBEDTLS_ENTROPY_BLOCK_SIZE
+ *
+ * \return          0 if successful, or MBEDTLS_ERR_ENTROPY_SOURCE_FAILED
+ */
+int mbedtls_entropy_func( void *data, unsigned char *output, size_t len );
+
+/**
+ * \brief           Add data to the accumulator manually
+ *                  (Thread-safe if MBEDTLS_THREADING_C is enabled)
+ *
+ * \param ctx       Entropy context
+ * \param data      Data to add
+ * \param len       Length of data
+ *
+ * \return          0 if successful
+ */
+int mbedtls_entropy_update_manual( mbedtls_entropy_context *ctx,
+                           const unsigned char *data, size_t len );
+
+#if defined(MBEDTLS_ENTROPY_NV_SEED)
+/**
+ * \brief           Trigger an update of the seed file in NV by using the
+ *                  current entropy pool.
+ *
+ * \param ctx       Entropy context
+ *
+ * \return          0 if successful
+ */
+int mbedtls_entropy_update_nv_seed( mbedtls_entropy_context *ctx );
+#endif /* MBEDTLS_ENTROPY_NV_SEED */
+
+#if defined(MBEDTLS_FS_IO)
+/**
+ * \brief               Write a seed file
+ *
+ * \param ctx           Entropy context
+ * \param path          Name of the file
+ *
+ * \return              0 if successful,
+ *                      MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR on file error, or
+ *                      MBEDTLS_ERR_ENTROPY_SOURCE_FAILED
+ */
+int mbedtls_entropy_write_seed_file( mbedtls_entropy_context *ctx, const char *path );
+
+/**
+ * \brief               Read and update a seed file. Seed is added to this
+ *                      instance. No more than MBEDTLS_ENTROPY_MAX_SEED_SIZE bytes are
+ *                      read from the seed file. The rest is ignored.
+ *
+ * \param ctx           Entropy context
+ * \param path          Name of the file
+ *
+ * \return              0 if successful,
+ *                      MBEDTLS_ERR_ENTROPY_FILE_IO_ERROR on file error,
+ *                      MBEDTLS_ERR_ENTROPY_SOURCE_FAILED
+ */
+int mbedtls_entropy_update_seed_file( mbedtls_entropy_context *ctx, const char *path );
+#endif /* MBEDTLS_FS_IO */
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+ * \brief          Checkup routine
+ *
+ *                 This module self-test also calls the entropy self-test,
+ *                 mbedtls_entropy_source_self_test();
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_entropy_self_test( int verbose );
+
+#if defined(MBEDTLS_ENTROPY_HARDWARE_ALT)
+/**
+ * \brief          Checkup routine
+ *
+ *                 Verifies the integrity of the hardware entropy source
+ *                 provided by the function 'mbedtls_hardware_poll()'.
+ *
+ *                 Note this is the only hardware entropy source that is known
+ *                 at link time, and other entropy sources configured
+ *                 dynamically at runtime by the function
+ *                 mbedtls_entropy_add_source() will not be tested.
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_entropy_source_self_test( int verbose );
+#endif /* MBEDTLS_ENTROPY_HARDWARE_ALT */
+#endif /* MBEDTLS_SELF_TEST */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* entropy.h */

thirdparty/mbedtls/include/mbedtls/entropy_poll.h

+/**
+ * \file entropy_poll.h
+ *
+ * \brief Platform-specific and custom entropy polling functions
+ */
+/*
+ *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ENTROPY_POLL_H
+#define MBEDTLS_ENTROPY_POLL_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/*
+ * Default thresholds for built-in sources, in bytes
+ */
+#define MBEDTLS_ENTROPY_MIN_PLATFORM     32     /**< Minimum for platform source    */
+#define MBEDTLS_ENTROPY_MIN_HAVEGE       32     /**< Minimum for HAVEGE             */
+#define MBEDTLS_ENTROPY_MIN_HARDCLOCK     4     /**< Minimum for mbedtls_timing_hardclock()        */
+#if !defined(MBEDTLS_ENTROPY_MIN_HARDWARE)
+#define MBEDTLS_ENTROPY_MIN_HARDWARE     32     /**< Minimum for the hardware source */
+#endif
+
+/**
+ * \brief           Entropy poll callback that provides 0 entropy.
+ */
+#if defined(MBEDTLS_TEST_NULL_ENTROPY)
+    int mbedtls_null_entropy_poll( void *data,
+                                unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#if !defined(MBEDTLS_NO_PLATFORM_ENTROPY)
+/**
+ * \brief           Platform-specific entropy poll callback
+ */
+int mbedtls_platform_entropy_poll( void *data,
+                           unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#if defined(MBEDTLS_HAVEGE_C)
+/**
+ * \brief           HAVEGE based entropy poll callback
+ *
+ * Requires an HAVEGE state as its data pointer.
+ */
+int mbedtls_havege_poll( void *data,
+                 unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#if defined(MBEDTLS_TIMING_C)
+/**
+ * \brief           mbedtls_timing_hardclock-based entropy poll callback
+ */
+int mbedtls_hardclock_poll( void *data,
+                    unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#if defined(MBEDTLS_ENTROPY_HARDWARE_ALT)
+/**
+ * \brief           Entropy poll callback for a hardware source
+ *
+ * \warning         This is not provided by mbed TLS!
+ *                  See \c MBEDTLS_ENTROPY_HARDWARE_ALT in config.h.
+ *
+ * \note            This must accept NULL as its first argument.
+ */
+int mbedtls_hardware_poll( void *data,
+                           unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#if defined(MBEDTLS_ENTROPY_NV_SEED)
+/**
+ * \brief           Entropy poll callback for a non-volatile seed file
+ *
+ * \note            This must accept NULL as its first argument.
+ */
+int mbedtls_nv_seed_poll( void *data,
+                          unsigned char *output, size_t len, size_t *olen );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* entropy_poll.h */

thirdparty/mbedtls/include/mbedtls/error.h

+/**
+ * \file error.h
+ *
+ * \brief Error to string translation
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_ERROR_H
+#define MBEDTLS_ERROR_H
+
+#include <stddef.h>
+
+/**
+ * Error code layout.
+ *
+ * Currently we try to keep all error codes within the negative space of 16
+ * bits signed integers to support all platforms (-0x0001 - -0x7FFF). In
+ * addition we'd like to give two layers of information on the error if
+ * possible.
+ *
+ * For that purpose the error codes are segmented in the following manner:
+ *
+ * 16 bit error code bit-segmentation
+ *
+ * 1 bit  - Unused (sign bit)
+ * 3 bits - High level module ID
+ * 5 bits - Module-dependent error code
+ * 7 bits - Low level module errors
+ *
+ * For historical reasons, low-level error codes are divided in even and odd,
+ * even codes were assigned first, and -1 is reserved for other errors.
+ *
+ * Low-level module errors (0x0002-0x007E, 0x0003-0x007F)
+ *
+ * Module   Nr  Codes assigned
+ * MPI       7  0x0002-0x0010
+ * GCM       3  0x0012-0x0014   0x0013-0x0013
+ * BLOWFISH  3  0x0016-0x0018   0x0017-0x0017
+ * THREADING 3  0x001A-0x001E
+ * AES       4  0x0020-0x0022   0x0023-0x0025
+ * CAMELLIA  3  0x0024-0x0026   0x0027-0x0027
+ * XTEA      2  0x0028-0x0028   0x0029-0x0029
+ * BASE64    2  0x002A-0x002C
+ * OID       1  0x002E-0x002E   0x000B-0x000B
+ * PADLOCK   1  0x0030-0x0030
+ * DES       2  0x0032-0x0032   0x0033-0x0033
+ * CTR_DBRG  4  0x0034-0x003A
+ * ENTROPY   3  0x003C-0x0040   0x003D-0x003F
+ * NET      11  0x0042-0x0052   0x0043-0x0045
+ * ASN1      7  0x0060-0x006C
+ * CMAC      1  0x007A-0x007A
+ * PBKDF2    1  0x007C-0x007C
+ * HMAC_DRBG 4                  0x0003-0x0009
+ * CCM       3                  0x000D-0x0011
+ * ARC4      1                  0x0019-0x0019
+ * MD2       1                  0x002B-0x002B
+ * MD4       1                  0x002D-0x002D
+ * MD5       1                  0x002F-0x002F
+ * RIPEMD160 1                  0x0031-0x0031
+ * SHA1      1                  0x0035-0x0035
+ * SHA256    1                  0x0037-0x0037
+ * SHA512    1                  0x0039-0x0039
+ *
+ * High-level module nr (3 bits - 0x0...-0x7...)
+ * Name      ID  Nr of Errors
+ * PEM       1   9
+ * PKCS#12   1   4 (Started from top)
+ * X509      2   20
+ * PKCS5     2   4 (Started from top)
+ * DHM       3   11
+ * PK        3   15 (Started from top)
+ * RSA       4   11
+ * ECP       4   9 (Started from top)
+ * MD        5   5
+ * CIPHER    6   8
+ * SSL       6   17 (Started from top)
+ * SSL       7   31
+ *
+ * Module dependent error code (5 bits 0x.00.-0x.F8.)
+ */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief Translate a mbed TLS error code into a string representation,
+ *        Result is truncated if necessary and always includes a terminating
+ *        null byte.
+ *
+ * \param errnum    error code
+ * \param buffer    buffer to place representation in
+ * \param buflen    length of the buffer
+ */
+void mbedtls_strerror( int errnum, char *buffer, size_t buflen );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* error.h */

thirdparty/mbedtls/include/mbedtls/havege.h

+/**
+ * \file havege.h
+ *
+ * \brief HAVEGE: HArdware Volatile Entropy Gathering and Expansion
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_HAVEGE_H
+#define MBEDTLS_HAVEGE_H
+
+#include <stddef.h>
+
+#define MBEDTLS_HAVEGE_COLLECT_SIZE 1024
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          HAVEGE state structure
+ */
+typedef struct
+{
+    int PT1, PT2, offset[2];
+    int pool[MBEDTLS_HAVEGE_COLLECT_SIZE];
+    int WALK[8192];
+}
+mbedtls_havege_state;
+
+/**
+ * \brief          HAVEGE initialization
+ *
+ * \param hs       HAVEGE state to be initialized
+ */
+void mbedtls_havege_init( mbedtls_havege_state *hs );
+
+/**
+ * \brief          Clear HAVEGE state
+ *
+ * \param hs       HAVEGE state to be cleared
+ */
+void mbedtls_havege_free( mbedtls_havege_state *hs );
+
+/**
+ * \brief          HAVEGE rand function
+ *
+ * \param p_rng    A HAVEGE state
+ * \param output   Buffer to fill
+ * \param len      Length of buffer
+ *
+ * \return         0
+ */
+int mbedtls_havege_random( void *p_rng, unsigned char *output, size_t len );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* havege.h */

thirdparty/mbedtls/include/mbedtls/md_internal.h

+/**
+ * \file md_internal.h
+ *
+ * \brief Message digest wrappers.
+ *
+ * \warning This in an internal header. Do not include directly.
+ *
+ * \author Adriaan de Jong <dejong@fox-it.com>
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_MD_WRAP_H
+#define MBEDTLS_MD_WRAP_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "md.h"
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Message digest information.
+ * Allows message digest functions to be called in a generic way.
+ */
+struct mbedtls_md_info_t
+{
+    /** Digest identifier */
+    mbedtls_md_type_t type;
+
+    /** Name of the message digest */
+    const char * name;
+
+    /** Output length of the digest function in bytes */
+    int size;
+
+    /** Block length of the digest function in bytes */
+    int block_size;
+
+    /** Digest initialisation function */
+    int (*starts_func)( void *ctx );
+
+    /** Digest update function */
+    int (*update_func)( void *ctx, const unsigned char *input, size_t ilen );
+
+    /** Digest finalisation function */
+    int (*finish_func)( void *ctx, unsigned char *output );
+
+    /** Generic digest function */
+    int (*digest_func)( const unsigned char *input, size_t ilen,
+                        unsigned char *output );
+
+    /** Allocate a new context */
+    void * (*ctx_alloc_func)( void );
+
+    /** Free the given context */
+    void (*ctx_free_func)( void *ctx );
+
+    /** Clone state from a context */
+    void (*clone_func)( void *dst, const void *src );
+
+    /** Internal use only */
+    int (*process_func)( void *ctx, const unsigned char *input );
+};
+
+#if defined(MBEDTLS_MD2_C)
+extern const mbedtls_md_info_t mbedtls_md2_info;
+#endif
+#if defined(MBEDTLS_MD4_C)
+extern const mbedtls_md_info_t mbedtls_md4_info;
+#endif
+#if defined(MBEDTLS_MD5_C)
+extern const mbedtls_md_info_t mbedtls_md5_info;
+#endif
+#if defined(MBEDTLS_RIPEMD160_C)
+extern const mbedtls_md_info_t mbedtls_ripemd160_info;
+#endif
+#if defined(MBEDTLS_SHA1_C)
+extern const mbedtls_md_info_t mbedtls_sha1_info;
+#endif
+#if defined(MBEDTLS_SHA256_C)
+extern const mbedtls_md_info_t mbedtls_sha224_info;
+extern const mbedtls_md_info_t mbedtls_sha256_info;
+#endif
+#if defined(MBEDTLS_SHA512_C)
+extern const mbedtls_md_info_t mbedtls_sha384_info;
+extern const mbedtls_md_info_t mbedtls_sha512_info;
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* MBEDTLS_MD_WRAP_H */

thirdparty/mbedtls/include/mbedtls/memory_buffer_alloc.h

+/**
+ * \file memory_buffer_alloc.h
+ *
+ * \brief Buffer-based memory allocator
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_MEMORY_BUFFER_ALLOC_H
+#define MBEDTLS_MEMORY_BUFFER_ALLOC_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include <stddef.h>
+
+/**
+ * \name SECTION: Module settings
+ *
+ * The configuration options you can set for this module are in this section.
+ * Either change them in config.h or define them on the compiler command line.
+ * \{
+ */
+
+#if !defined(MBEDTLS_MEMORY_ALIGN_MULTIPLE)
+#define MBEDTLS_MEMORY_ALIGN_MULTIPLE       4 /**< Align on multiples of this value */
+#endif
+
+/* \} name SECTION: Module settings */
+
+#define MBEDTLS_MEMORY_VERIFY_NONE         0
+#define MBEDTLS_MEMORY_VERIFY_ALLOC        (1 << 0)
+#define MBEDTLS_MEMORY_VERIFY_FREE         (1 << 1)
+#define MBEDTLS_MEMORY_VERIFY_ALWAYS       (MBEDTLS_MEMORY_VERIFY_ALLOC | MBEDTLS_MEMORY_VERIFY_FREE)
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief   Initialize use of stack-based memory allocator.
+ *          The stack-based allocator does memory management inside the
+ *          presented buffer and does not call calloc() and free().
+ *          It sets the global mbedtls_calloc() and mbedtls_free() pointers
+ *          to its own functions.
+ *          (Provided mbedtls_calloc() and mbedtls_free() are thread-safe if
+ *           MBEDTLS_THREADING_C is defined)
+ *
+ * \note    This code is not optimized and provides a straight-forward
+ *          implementation of a stack-based memory allocator.
+ *
+ * \param buf   buffer to use as heap
+ * \param len   size of the buffer
+ */
+void mbedtls_memory_buffer_alloc_init( unsigned char *buf, size_t len );
+
+/**
+ * \brief   Free the mutex for thread-safety and clear remaining memory
+ */
+void mbedtls_memory_buffer_alloc_free( void );
+
+/**
+ * \brief   Determine when the allocator should automatically verify the state
+ *          of the entire chain of headers / meta-data.
+ *          (Default: MBEDTLS_MEMORY_VERIFY_NONE)
+ *
+ * \param verify    One of MBEDTLS_MEMORY_VERIFY_NONE, MBEDTLS_MEMORY_VERIFY_ALLOC,
+ *                  MBEDTLS_MEMORY_VERIFY_FREE or MBEDTLS_MEMORY_VERIFY_ALWAYS
+ */
+void mbedtls_memory_buffer_set_verify( int verify );
+
+#if defined(MBEDTLS_MEMORY_DEBUG)
+/**
+ * \brief   Print out the status of the allocated memory (primarily for use
+ *          after a program should have de-allocated all memory)
+ *          Prints out a list of 'still allocated' blocks and their stack
+ *          trace if MBEDTLS_MEMORY_BACKTRACE is defined.
+ */
+void mbedtls_memory_buffer_alloc_status( void );
+
+/**
+ * \brief   Get the peak heap usage so far
+ *
+ * \param max_used      Peak number of bytes in use or committed. This
+ *                      includes bytes in allocated blocks too small to split
+ *                      into smaller blocks but larger than the requested size.
+ * \param max_blocks    Peak number of blocks in use, including free and used
+ */
+void mbedtls_memory_buffer_alloc_max_get( size_t *max_used, size_t *max_blocks );
+
+/**
+ * \brief   Reset peak statistics
+ */
+void mbedtls_memory_buffer_alloc_max_reset( void );
+
+/**
+ * \brief   Get the current heap usage
+ *
+ * \param cur_used      Current number of bytes in use or committed. This
+ *                      includes bytes in allocated blocks too small to split
+ *                      into smaller blocks but larger than the requested size.
+ * \param cur_blocks    Current number of blocks in use, including free and used
+ */
+void mbedtls_memory_buffer_alloc_cur_get( size_t *cur_used, size_t *cur_blocks );
+#endif /* MBEDTLS_MEMORY_DEBUG */
+
+/**
+ * \brief   Verifies that all headers in the memory buffer are correct
+ *          and contain sane values. Helps debug buffer-overflow errors.
+ *
+ *          Prints out first failure if MBEDTLS_MEMORY_DEBUG is defined.
+ *          Prints out full header information if MBEDTLS_MEMORY_DEBUG
+ *          is defined. (Includes stack trace information for each block if
+ *          MBEDTLS_MEMORY_BACKTRACE is defined as well).
+ *
+ * \return             0 if verified, 1 otherwise
+ */
+int mbedtls_memory_buffer_alloc_verify( void );
+
+#if defined(MBEDTLS_SELF_TEST)
+/**
+ * \brief          Checkup routine
+ *
+ * \return         0 if successful, or 1 if a test failed
+ */
+int mbedtls_memory_buffer_alloc_self_test( int verbose );
+#endif
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* memory_buffer_alloc.h */

thirdparty/mbedtls/include/mbedtls/net.h

+/**
+ * \file net.h
+ *
+ * \brief Deprecated header file that includes mbedtls/net_sockets.h
+ *
+ * \deprecated Superseded by mbedtls/net_sockets.h
+ */
+/*
+ *  Copyright (C) 2006-2016, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+
+#if !defined(MBEDTLS_DEPRECATED_REMOVED)
+#include "mbedtls/net_sockets.h"
+#if defined(MBEDTLS_DEPRECATED_WARNING)
+#warning "Deprecated header file: Superseded by mbedtls/net_sockets.h"
+#endif /* MBEDTLS_DEPRECATED_WARNING */
+#endif /* !MBEDTLS_DEPRECATED_REMOVED */

thirdparty/mbedtls/include/mbedtls/net_sockets.h

+/**
+ * \file net_sockets.h
+ *
+ * \brief Network communication functions
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_NET_SOCKETS_H
+#define MBEDTLS_NET_SOCKETS_H
+
+#if !defined(MBEDTLS_CONFIG_FILE)
+#include "config.h"
+#else
+#include MBEDTLS_CONFIG_FILE
+#endif
+
+#include "ssl.h"
+
+#include <stddef.h>
+#include <stdint.h>
+
+#define MBEDTLS_ERR_NET_SOCKET_FAILED                     -0x0042  /**< Failed to open a socket. */
+#define MBEDTLS_ERR_NET_CONNECT_FAILED                    -0x0044  /**< The connection to the given server / port failed. */
+#define MBEDTLS_ERR_NET_BIND_FAILED                       -0x0046  /**< Binding of the socket failed. */
+#define MBEDTLS_ERR_NET_LISTEN_FAILED                     -0x0048  /**< Could not listen on the socket. */
+#define MBEDTLS_ERR_NET_ACCEPT_FAILED                     -0x004A  /**< Could not accept the incoming connection. */
+#define MBEDTLS_ERR_NET_RECV_FAILED                       -0x004C  /**< Reading information from the socket failed. */
+#define MBEDTLS_ERR_NET_SEND_FAILED                       -0x004E  /**< Sending information through the socket failed. */
+#define MBEDTLS_ERR_NET_CONN_RESET                        -0x0050  /**< Connection was reset by peer. */
+#define MBEDTLS_ERR_NET_UNKNOWN_HOST                      -0x0052  /**< Failed to get an IP address for the given hostname. */
+#define MBEDTLS_ERR_NET_BUFFER_TOO_SMALL                  -0x0043  /**< Buffer is too small to hold the data. */
+#define MBEDTLS_ERR_NET_INVALID_CONTEXT                   -0x0045  /**< The context is invalid, eg because it was free()ed. */
+
+#define MBEDTLS_NET_LISTEN_BACKLOG         10 /**< The backlog that listen() should use. */
+
+#define MBEDTLS_NET_PROTO_TCP 0 /**< The TCP transport protocol */
+#define MBEDTLS_NET_PROTO_UDP 1 /**< The UDP transport protocol */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * Wrapper type for sockets.
+ *
+ * Currently backed by just a file descriptor, but might be more in the future
+ * (eg two file descriptors for combined IPv4 + IPv6 support, or additional
+ * structures for hand-made UDP demultiplexing).
+ */
+typedef struct
+{
+    int fd;             /**< The underlying file descriptor                 */
+}
+mbedtls_net_context;
+
+/**
+ * \brief          Initialize a context
+ *                 Just makes the context ready to be used or freed safely.
+ *
+ * \param ctx      Context to initialize
+ */
+void mbedtls_net_init( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Initiate a connection with host:port in the given protocol
+ *
+ * \param ctx      Socket to use
+ * \param host     Host to connect to
+ * \param port     Port to connect to
+ * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
+ *
+ * \return         0 if successful, or one of:
+ *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
+ *                      MBEDTLS_ERR_NET_UNKNOWN_HOST,
+ *                      MBEDTLS_ERR_NET_CONNECT_FAILED
+ *
+ * \note           Sets the socket in connected mode even with UDP.
+ */
+int mbedtls_net_connect( mbedtls_net_context *ctx, const char *host, const char *port, int proto );
+
+/**
+ * \brief          Create a receiving socket on bind_ip:port in the chosen
+ *                 protocol. If bind_ip == NULL, all interfaces are bound.
+ *
+ * \param ctx      Socket to use
+ * \param bind_ip  IP to bind to, can be NULL
+ * \param port     Port number to use
+ * \param proto    Protocol: MBEDTLS_NET_PROTO_TCP or MBEDTLS_NET_PROTO_UDP
+ *
+ * \return         0 if successful, or one of:
+ *                      MBEDTLS_ERR_NET_SOCKET_FAILED,
+ *                      MBEDTLS_ERR_NET_BIND_FAILED,
+ *                      MBEDTLS_ERR_NET_LISTEN_FAILED
+ *
+ * \note           Regardless of the protocol, opens the sockets and binds it.
+ *                 In addition, make the socket listening if protocol is TCP.
+ */
+int mbedtls_net_bind( mbedtls_net_context *ctx, const char *bind_ip, const char *port, int proto );
+
+/**
+ * \brief           Accept a connection from a remote client
+ *
+ * \param bind_ctx  Relevant socket
+ * \param client_ctx Will contain the connected client socket
+ * \param client_ip Will contain the client IP address
+ * \param buf_size  Size of the client_ip buffer
+ * \param ip_len    Will receive the size of the client IP written
+ *
+ * \return          0 if successful, or
+ *                  MBEDTLS_ERR_NET_ACCEPT_FAILED, or
+ *                  MBEDTLS_ERR_NET_BUFFER_TOO_SMALL if buf_size is too small,
+ *                  MBEDTLS_ERR_SSL_WANT_READ if bind_fd was set to
+ *                  non-blocking and accept() would block.
+ */
+int mbedtls_net_accept( mbedtls_net_context *bind_ctx,
+                        mbedtls_net_context *client_ctx,
+                        void *client_ip, size_t buf_size, size_t *ip_len );
+
+/**
+ * \brief          Set the socket blocking
+ *
+ * \param ctx      Socket to set
+ *
+ * \return         0 if successful, or a non-zero error code
+ */
+int mbedtls_net_set_block( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Set the socket non-blocking
+ *
+ * \param ctx      Socket to set
+ *
+ * \return         0 if successful, or a non-zero error code
+ */
+int mbedtls_net_set_nonblock( mbedtls_net_context *ctx );
+
+/**
+ * \brief          Portable usleep helper
+ *
+ * \param usec     Amount of microseconds to sleep
+ *
+ * \note           Real amount of time slept will not be less than
+ *                 select()'s timeout granularity (typically, 10ms).
+ */
+void mbedtls_net_usleep( unsigned long usec );
+
+/**
+ * \brief          Read at most 'len' characters. If no error occurs,
+ *                 the actual amount read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to write to
+ * \param len      Maximum length of the buffer
+ *
+ * \return         the number of bytes received,
+ *                 or a non-zero error code; with a non-blocking socket,
+ *                 MBEDTLS_ERR_SSL_WANT_READ indicates read() would block.
+ */
+int mbedtls_net_recv( void *ctx, unsigned char *buf, size_t len );
+
+/**
+ * \brief          Write at most 'len' characters. If no error occurs,
+ *                 the actual amount read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to read from
+ * \param len      The length of the buffer
+ *
+ * \return         the number of bytes sent,
+ *                 or a non-zero error code; with a non-blocking socket,
+ *                 MBEDTLS_ERR_SSL_WANT_WRITE indicates write() would block.
+ */
+int mbedtls_net_send( void *ctx, const unsigned char *buf, size_t len );
+
+/**
+ * \brief          Read at most 'len' characters, blocking for at most
+ *                 'timeout' seconds. If no error occurs, the actual amount
+ *                 read is returned.
+ *
+ * \param ctx      Socket
+ * \param buf      The buffer to write to
+ * \param len      Maximum length of the buffer
+ * \param timeout  Maximum number of milliseconds to wait for data
+ *                 0 means no timeout (wait forever)
+ *
+ * \return         the number of bytes received,
+ *                 or a non-zero error code:
+ *                 MBEDTLS_ERR_SSL_TIMEOUT if the operation timed out,
+ *                 MBEDTLS_ERR_SSL_WANT_READ if interrupted by a signal.
+ *
+ * \note           This function will block (until data becomes available or
+ *                 timeout is reached) even if the socket is set to
+ *                 non-blocking. Handling timeouts with non-blocking reads
+ *                 requires a different strategy.
+ */
+int mbedtls_net_recv_timeout( void *ctx, unsigned char *buf, size_t len,
+                      uint32_t timeout );
+
+/**
+ * \brief          Gracefully shutdown the connection and free associated data
+ *
+ * \param ctx      The context to free
+ */
+void mbedtls_net_free( mbedtls_net_context *ctx );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* net_sockets.h */

thirdparty/mbedtls/include/mbedtls/padlock.h

+/**
+ * \file padlock.h
+ *
+ * \brief VIA PadLock ACE for HW encryption/decryption supported by some
+ *        processors
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_PADLOCK_H
+#define MBEDTLS_PADLOCK_H
+
+#include "aes.h"
+
+#define MBEDTLS_ERR_PADLOCK_DATA_MISALIGNED               -0x0030  /**< Input data should be aligned. */
+
+#if defined(__has_feature)
+#if __has_feature(address_sanitizer)
+#define MBEDTLS_HAVE_ASAN
+#endif
+#endif
+
+/* Some versions of ASan result in errors about not enough registers */
+#if defined(MBEDTLS_HAVE_ASM) && defined(__GNUC__) && defined(__i386__) && \
+    !defined(MBEDTLS_HAVE_ASAN)
+
+#ifndef MBEDTLS_HAVE_X86
+#define MBEDTLS_HAVE_X86
+#endif
+
+#include <stdint.h>
+
+#define MBEDTLS_PADLOCK_RNG 0x000C
+#define MBEDTLS_PADLOCK_ACE 0x00C0
+#define MBEDTLS_PADLOCK_PHE 0x0C00
+#define MBEDTLS_PADLOCK_PMM 0x3000
+
+#define MBEDTLS_PADLOCK_ALIGN16(x) (uint32_t *) (16 + ((int32_t) x & ~15))
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/**
+ * \brief          PadLock detection routine
+ *
+ * \param feature  The feature to detect
+ *
+ * \return         1 if CPU has support for the feature, 0 otherwise
+ */
+int mbedtls_padlock_has_support( int feature );
+
+/**
+ * \brief          PadLock AES-ECB block en(de)cryption
+ *
+ * \param ctx      AES context
+ * \param mode     MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
+ * \param input    16-byte input block
+ * \param output   16-byte output block
+ *
+ * \return         0 if success, 1 if operation failed
+ */
+int mbedtls_padlock_xcryptecb( mbedtls_aes_context *ctx,
+                       int mode,
+                       const unsigned char input[16],
+                       unsigned char output[16] );
+
+/**
+ * \brief          PadLock AES-CBC buffer en(de)cryption
+ *
+ * \param ctx      AES context
+ * \param mode     MBEDTLS_AES_ENCRYPT or MBEDTLS_AES_DECRYPT
+ * \param length   length of the input data
+ * \param iv       initialization vector (updated after use)
+ * \param input    buffer holding the input data
+ * \param output   buffer holding the output data
+ *
+ * \return         0 if success, 1 if operation failed
+ */
+int mbedtls_padlock_xcryptcbc( mbedtls_aes_context *ctx,
+                       int mode,
+                       size_t length,
+                       unsigned char iv[16],
+                       const unsigned char *input,
+                       unsigned char *output );
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* HAVE_X86  */
+
+#endif /* padlock.h */

thirdparty/mbedtls/include/mbedtls/pem.h

+/**
+ * \file pem.h
+ *
+ * \brief Privacy Enhanced Mail (PEM) decoding
+ */
+/*
+ *  Copyright (C) 2006-2015, ARM Limited, All Rights Reserved
+ *  SPDX-License-Identifier: Apache-2.0
+ *
+ *  Licensed under the Apache License, Version 2.0 (the "License"); you may
+ *  not use this file except in compliance with the License.
+ *  You may obtain a copy of the License at
+ *
+ *  http://www.apache.org/licenses/LICENSE-2.0
+ *
+ *  Unless required by applicable law or agreed to in writing, software
+ *  distributed under the License is distributed on an "AS IS" BASIS, WITHOUT
+ *  WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ *  See the License for the specific language governing permissions and
+ *  limitations under the License.
+ *
+ *  This file is part of mbed TLS (https://tls.mbed.org)
+ */
+#ifndef MBEDTLS_PEM_H
+#define MBEDTLS_PEM_H
+
+#include <stddef.h>
+
+/**
+ * \name PEM Error codes
+ * These error codes are returned in case of errors reading the
+ * PEM data.
+ * \{
+ */
+#define MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT          -0x1080  /**< No PEM header or footer found. */
+#define MBEDTLS_ERR_PEM_INVALID_DATA                      -0x1100  /**< PEM string is not as expected. */
+#define MBEDTLS_ERR_PEM_ALLOC_FAILED                      -0x1180  /**< Failed to allocate memory. */
+#define MBEDTLS_ERR_PEM_INVALID_ENC_IV                    -0x1200  /**< RSA IV is not in hex-format. */
+#define MBEDTLS_ERR_PEM_UNKNOWN_ENC_ALG                   -0x1280  /**< Unsupported key encryption algorithm. */
+#define MBEDTLS_ERR_PEM_PASSWORD_REQUIRED                 -0x1300  /**< Private key password can't be empty. */
+#define MBEDTLS_ERR_PEM_PASSWORD_MISMATCH                 -0x1380  /**< Given private key password does not allow for correct decryption. */
+#define MBEDTLS_ERR_PEM_FEATURE_UNAVAILABLE               -0x1400  /**< Unavailable feature, e.g. hashing/encryption combination. */
+#define MBEDTLS_ERR_PEM_BAD_INPUT_DATA                    -0x1480  /**< Bad input parameters to function. */
+/* \} name */
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#if defined(MBEDTLS_PEM_PARSE_C)
+/**
+ * \brief       PEM context structure
+ */
+typedef struct
+{
+    unsigned char *buf;     /*!< buffer for decoded data             */
+    size_t buflen;          /*!< length of the buffer                */
+    unsigned char *info;    /*!< buffer for extra header information */
+}
+mbedtls_pem_context;
+
+/**
+ * \brief       PEM context setup
+ *
+ * \param ctx   context to be initialized
+ */
+void mbedtls_pem_init( mbedtls_pem_context *ctx );
+
+/**
+ * \brief       Read a buffer for PEM information and store the resulting
+ *              data into the specified context buffers.
+ *
+ * \param ctx       context to use
+ * \param header    header string to seek and expect
+ * \param footer    footer string to seek and expect
+ * \param data      source data to look in (must be nul-terminated)
+ * \param pwd       password for decryption (can be NULL)
+ * \param pwdlen    length of password
+ * \param use_len   destination for total length used (set after header is
+ *                  correctly read, so unless you get
+ *                  MBEDTLS_ERR_PEM_BAD_INPUT_DATA or
+ *                  MBEDTLS_ERR_PEM_NO_HEADER_FOOTER_PRESENT, use_len is
+ *                  the length to skip)
+ *
+ * \note            Attempts to check password correctness by verifying if
+ *                  the decrypted text starts with an ASN.1 sequence of
+ *                  appropriate length
+ *
+ * \return          0 on success, or a specific PEM error code
+ */
+int mbedtls_pem_read_buffer( mbedtls_pem_context *ctx, const char *header, const char *footer,
+                     const unsigned char *data,
+                     const unsigned char *pwd,
+                     size_t pwdlen, size_t *use_len );
+
+/**
+ * \brief       PEM context memory freeing
+ *
+ * \param ctx   context to be freed
+ */
+void mbedtls_pem_free( mbedtls_pem_context *ctx );
+#endif /* MBEDTLS_PEM_PARSE_C */
+
+#if defined(MBEDTLS_PEM_WRITE_C)
+/**
+ * \brief           Write a buffer of PEM information from a DER encoded
+ *                  buffer.
+ *
+ * \param header    header string to write
+ * \param footer    footer string to write
+ * \param der_data  DER data to write
+ * \param der_len   length of the DER data
+ * \param buf       buffer to write to
+ * \param buf_len   length of output buffer
+ * \param olen      total length written / required (if buf_len is not enough)
+ *
+ * \return          0 on success, or a specific PEM or BASE64 error code. On
+ *                  MBEDTLS_ERR_BASE64_BUFFER_TOO_SMALL olen is the required
+ *                  size.
+ */
+int mbedtls_pem_write_buffer( const char *header, const char *footer,
+                      const unsigned char *der_data, size_t der_len,
+                      unsigned char *buf, size_t buf_len, size_t *olen );
+#endif /* MBEDTLS_PEM_WRITE_C */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* pem.h */